Jindal Medi Surge

LOCKING EXTRA ARTICULAR SMALL T-PLATE RIGHT ANGLED 2.7MM HEAD ORTHOPEDIC IMPALNT The aim of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by precise reduction, stable fixation preservation of blood supply, and early functional mobilization. Locking Plate and screw osteosynthesis have been established and clinically recognized for quite some time. Clinical results have been improved by using (internal fixation) in metaphyseal fractures and in osteopenic bone. Jindal Medi Surge Orthopedic Small Fragment Locking compression plate system is part of medical grade stainless steel and titanium plate and screw system that merges locking head screw technology with conventional plating techniques. The Small Locking Compression Plate System has many similarities to existing non-locking plate systems but with a few important improvements. Instead of cortical screws, locking head screws provide the ability to create a fixed-angle construct which also provides advantages in osteopenic bone or multifragmentary fractures where traditional screw purchase is compromised. Locking head screws does not rely on plate/bone compression to maintain stability, but function similarly to multiple small angled blade plates. The Small Locking Compression Plate System has the following features: Uniform hole spacing, Load (compression) and neutral screw positions, Small Locking Compression Plates have combination locking and compression holes (combi holes), The combi holes allow placement of standard cortical and cancellous bone screws on one side or threaded conical locking screws on the opposite side of each hole. Threaded hole section for locking screw. Dynamic compression unit hole section for standard screw. Locking screw in the threaded side of the plate hole. Indications: All Small Fragment LCP Locking Compression Plates are intended for fixation of fractures, osteotomies, and non-union of the clavicle, scapula, olecranon, humerus, radius, ulna, pelvis, distal tibia and fibula, particularly in osteopenic bone. Fixation Principles: The following points distinguish treatment using locking head screw technology from conventional plating techniques: It enables fracture treatment using compression plating with conventional cortical or cancellous screws. A locking compression plate can be used as an internal fixator and permit stable bridging over shattered zones. The small locking compression plate system permits the combination of conventional and locking screws. Unicortical locking screw permits better vascularity.

VETERINARY FESSA HINGE FOR 6MM


Jindal Medi Surge is a CE and ISO Certified leading Manufacturer and Exporter of Surgical and Orthopedic / Orthopaedic Instruments and Devices used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum, Titanium & Carbon Fiber Only. Our Products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.

For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Brand & also Manufacture on OEM basis for various international brands.

Titanium Cortical Screw 

Jindal Medi Surge is a CE and ISO Certified leading Manufacturer and Exporter of Surgical and Orthopedic / Orthopaedic Instruments used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum, Titanium & Carbon Fiber Only. Our Products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.

For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Brand & also Manufacture on OEM basis for various international brands.

Titanium Locking T Plate


Jindal Medi Surge is a CE and ISO Certified Leading Manufacturer, Exporter of Surgical and Orthopedic Instruments used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum & Carbon Fiber Only. Our products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.

For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Branded & also Manufacture on an OEM basis for various international brands.

Stainless Steel Narrow DCP 4.5mm


Jindal Medi Surge is a CE and ISO Certified Leading Manufacturer, Exporter of Surgical and Orthopedic Instruments used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum & Carbon Fiber Only. Our products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.
For Bulk Order & Customized Listing, kindly message us.We sell exclusively on our JMS Branded & also Manufacture on an OEM basis for various international brands.

The Orthopedic I-Plate 1.5mm Maxillofacial Implant is designed for use in maxillofacial surgery to stabilize fractures or osteotomies in facial bones. The I-plate is a straight, linear implant that provides support and alignment in areas where a straight configuration is needed.
Specifications:Material: Typically made from Titanium or SS316L stainless steel.
Titanium: Known for its excellent biocompatibility, lightweight nature, and high resistance to corrosion, making it an ideal material for implants that need to be durable and well-tolerated by the body.SS316L: Provides strength and durability, with good biocompatibility and corrosion resistance, suitable for surgical implants.Design: I-Plate
The I-plate features a simple, straight design, which is effective for providing linear support along the length of the bone. This design is ideal for stabilization in areas where the bone requires a straightforward, unobtrusive implant.Thickness: 1.5mm
This thickness strikes a balance between providing sufficient strength for stabilization while maintaining a low profile. It ensures that the plate is strong enough for its purpose while minimizing the impact on patient comfort and reducing the visibility of the implant under the skin.Applications:This I-plate is commonly used in:
Maxillofacial Fracture Fixation: Particularly useful for stabilizing linear fractures or osteotomies in facial bones, such as the mandible or zygomatic arch.Reconstructive Surgery: Applied in cases where a straight, linear support is needed to realign and stabilize bone segments.Orthognathic Surgery: Used in corrective jaw surgeries to provide support along a straight line, ensuring proper alignment and stability during healing.Advantages:Linear Support: The straight design provides consistent support along the length of the bone, making it effective for stabilizing linear fractures or osteotomies.Biocompatibility: The use of titanium or SS316L ensures that the implant is well-tolerated by the body, minimizing the risk of adverse reactions and promoting safe, long-term use.Durability: Both materials are strong and resistant to mechanical stresses, ensuring that the implant remains stable and functional throughout the healing process.Low Profile: The 1.5mm thickness helps to keep the plate minimally invasive, reducing discomfort and the likelihood of the implant being visible under the skin.Simplicity: The straightforward design of the I-plate makes it easy to position and secure, providing effective stabilization with minimal complexity.This implant is crucial for ensuring effective stabilization in maxillofacial procedures where linear support is needed, providing the necessary strength and alignment for successful healing.

The Orthopedic Angular Plate 1.5mm Titanium Maxillofacial Implant is a specialized device used in maxillofacial surgery to stabilize fractures or osteotomies in regions of the facial skeleton that require angular support. This plate is designed to provide a precise fit in areas where bones meet at an angle, ensuring optimal stabilization and alignment.
Specifications:Material: Made from Titanium.
Titanium: Known for its excellent biocompatibility, lightweight properties, and high resistance to corrosion, making it an ideal material for implants that need to remain in the body long-term.Design: Angular Plate
The plate is specifically shaped to conform to the angular contours of the facial bones. Its design allows it to provide strong and stable fixation in areas where bones meet at an angle, such as the mandible or other complex facial structures.Thickness: 1.5mm
This standard thickness offers a balance between providing sufficient strength for stabilization and maintaining a low profile, which is crucial for patient comfort and minimizing the visibility of the implant under the skin.Applications:This angular plate is commonly used in:
Maxillofacial Fracture Fixation: Particularly effective in stabilizing fractures in angular regions of the facial skeleton, such as the mandible's angle or zygomatic bone.Reconstructive Surgery: Utilized in procedures that involve the realignment and stabilization of bone segments in areas where an angular plate is necessary to maintain proper alignment.Orthognathic Surgery: Applied in corrective jaw surgeries where the bones need to be stabilized at specific angles, ensuring they heal in the correct alignment.Advantages:Precise Angular Support: The plate's design provides targeted support in areas where bones meet at an angle, ensuring stable fixation during the healing process.Biocompatibility: Titanium's biocompatibility minimizes the risk of adverse reactions, ensuring safe long-term use of the implant.Durability: Titanium's strength and resistance to corrosion ensure that the implant remains stable and effective throughout the healing process, even in the dynamic environment of the facial skeleton.Low Profile: The 1.5mm thickness ensures that the plate is minimally invasive, reducing discomfort and the likelihood of the implant being visible under the skin.Lightweight: Titanium's lightweight nature adds to patient comfort, as it reduces the overall burden on the surrounding bone and tissues.This implant is essential for achieving successful surgical outcomes in maxillofacial procedures, especially in cases where precise angular stabilization is required to ensure proper alignment and healing of the bones.

The Orthopedic Curved Plate 2.0mm with Bar Maxillofacial Implant is a specialized implant used in maxillofacial surgery, particularly designed for areas where the anatomy requires a curved fixation device with added reinforcement. This implant is essential for stabilizing and reconstructing facial bones with natural curvature, providing both flexibility and strength. Below are the key specifications and details:
Specifications:Material:
Constructed from Titanium or Stainless Steel (SS316L). Titanium is often preferred due to its biocompatibility, lightweight nature, and excellent resistance to corrosion, making it suitable for long-term implantation in the body.Design:
Curved Plate with Bar: The plate is designed with a pre-contoured curvature that matches the natural shape of certain facial bones, such as the mandible or zygomatic arch. The curvature ensures a better fit and easier application during surgery.Reinforcing Bar: The plate includes an integrated bar that runs along its length, providing additional strength and rigidity. This reinforcement is particularly useful in areas subjected to higher mechanical stress, ensuring the stability of the bone segments.Thickness:
2.0mm: The plate has a thickness of 2.0mm, which balances the need for strength and rigidity with the requirement for a low-profile design to minimize interference with surrounding soft tissues.Holes:
The plate is equipped with multiple holes for screw placement. These holes are strategically placed to allow secure fixation and optimal distribution of forces across the plate, enhancing the stability of the bone fixation.Indications:
Used in maxillofacial surgery for the treatment of fractures, osteotomies, or reconstruction of bones with natural curvature. The added bar provides extra support, making it suitable for areas that need reinforced stabilization, such as the mandible, orbital rim, or zygomatic arch.Sterilization:
Supplied in a sterile condition, ready for immediate use in surgical procedures to reduce the risk of infection and ensure patient safety.Applications:The Curved Plate 2.0mm with Bar is particularly effective in maxillofacial surgeries involving bones with natural curvature, where additional support is needed to maintain proper alignment and stability. Its design makes it ideal for complex reconstructions or in cases where the bones are subjected to significant mechanical forces. The integrated bar provides the necessary rigidity while maintaining the plate's ability to conform to the anatomical structure, facilitating effective healing and restoration of function.

Orthopedic Cervical Cage with Plate Zero Profile Titanium Spine Implant SpecificationsMaterial:
Constructed from medical-grade titanium alloy (commonly Ti6Al4V or Ti6Al4V ELI).Design:
A zero-profile design that integrates the cage and plate into a single implant, minimizing the risk of hardware protrusion and reducing the need for additional anterior plating.Anatomically contoured to fit the cervical vertebral space.Open architecture or fenestrated design to allow for bone graft placement and facilitate osseointegration.Available in various shapes such as rectangular, trapezoidal, or lordotic to match patient anatomy.Dimensions:
Available in various heights, widths, and lengths to accommodate different patient anatomies and surgical needs.Heights typically range from 5mm to 12mm.Widths usually range from 12mm to 17mm.Lengths typically range from 12mm to 16mm.Features:
Textured or serrated surfaces to prevent migration and enhance stability within the intervertebral space.Radiopaque markers for precise intraoperative and postoperative imaging.Various lordotic angles (e.g., 0°, 5°, 7°, 9°) to help restore the natural curvature of the cervical spine.Self-distracting design for ease of insertion and minimal disruption to surrounding tissues.Built-in fixation screws or locking mechanisms to provide immediate stability and eliminate the need for a separate anterior cervical plate.Intended Use:
Used in cervical spinal fusion procedures to provide stability and support to the cervical spine.Commonly indicated for conditions such as degenerative disc disease, cervical spondylosis, trauma, and recurrent disc herniation.Sterilization:
Supplied sterile or non-sterile, depending on the manufacturer’s specifications.If provided non-sterile, it can be sterilized using standard autoclave methods.Compatibility:
Designed to be used as a standalone device, eliminating the need for additional anterior cervical plating systems.Regulatory Compliance:
Must adhere to international standards such as ISO 13485 for medical devices.Compliance with specific regional regulations like FDA approval (for the USA) or CE marking (for Europe).

The Orthopedic Cannulated Cancellous Screw with a 6.5mm diameter, 16mm thread length, and made of titanium is a high-performance implant used in orthopedic procedures to provide stable fixation in cancellous bone. Here’s a detailed overview:
Specifications:Diameter:
6.5mm, designed for robust fixation in large cancellous bone regions, such as the femoral head, pelvis, or tibial plateau.Thread Length:
16mm (Partial Thread):Ideal for generating compression across fracture sites, promoting proper bone healing.Material:
Titanium:Lightweight, strong, and highly biocompatible.Offers excellent resistance to corrosion.Reduces the risk of adverse reactions or implant failure.Cannulated Design:
Features a hollow core that allows for placement over a guide wire.Ensures precise alignment and minimally invasive insertion.Self-Tapping Capability (Optional):
Some models include self-tapping tips for easier bone penetration without pre-tapping.Reduces surgery time and simplifies the procedure.Head Design:
Low-profile head minimizes soft tissue irritation.Hexagonal or cruciform head ensures firm engagement with the driver.Lengths:
Available in multiple lengths (typically ranging from 30mm to 120mm) to accommodate different surgical needs.Applications:Commonly used for fixation in cancellous bone, especially in:Femoral neck fractures.Tibial plateau fractures.Acetabular and pelvic fractures.Epiphyseal fractures (ends of long bones).Can also be used in osteotomy fixation and for addressing bone defects or non-unions.Advantages of Titanium Cannulated Screws:Precision: Cannulated design ensures accurate placement over a guide wire.Biocompatibility: Titanium minimizes allergic reactions and inflammatory responses.Strength and Durability: High load-bearing capacity for stable fixation.Corrosion Resistance: Long-lasting performance in the body.Imaging Compatibility: Produces minimal artifacts in post-operative imaging (MRI or CT).Comparison with Solid Cancellous Screws:Feature Cannulated Screw Solid ScrewPrecision Enhanced with guide wire use Manual placement onlySurgical Technique Minimally invasive Slightly more invasiveStrength Slightly reduced (due to hollow core) HigherApplication Complex, delicate fractures General useWould you like additional details about surgical techniques, instrumentation, or screw sizes?

Herbert Screw Dia. Short Thread

999S.00151 Length 15mm999S.00152 Length 16mm999S.00153 Length 17mm999S.00154 Length 18mm999S.00155 Length 19mm999S.00156 Length 20mm999S.00157 Length 21mm999S.00158 Length 22mm999S.00159 Length 23mm999S.0016 Length 24mm999S.00161 Length 25mm999S.00162 Length 26mm999S.00163 Length 27mm999S.00164 Length 28mm999S.00165 Length 29mm999S.00166 Length 30mm999S.00167 Length 32mm999S.00168 Length 34mm999S.00169 Length 36mm999S.0017 Length 38mm999S.00171 Length 40mm

The centering sleeve for a 1.25mm K-wire (Kirschner wire) is a specialized orthopedic instrument used in surgeries involving small fragment locking plates. This tool helps ensure precise placement of K-wires, which are often used for temporary fixation and alignment of bone fragments during surgical procedures.
Specifications and Uses:Centering Sleeve:
Purpose: Guides a 1.25mm K-wire, ensuring it is accurately centered and positioned relative to the locking plate and bone.Design: Fits into the holes of small fragment locking plates to provide a pathway for the K-wire.K-wire (1.25mm):
Size: A thin, flexible wire with a 1.25mm diameter, used for temporary stabilization and alignment of bone fragments.Function: Can be used to hold bone fragments in place temporarily before permanent fixation with screws and plates.Locking Plates (Small Fragment):
Used for stabilizing fractures in smaller bones, such as those in the wrist, hand, or ankle. These plates feature holes designed for both locking and non-locking screws to ensure stable fixation.Key Features and Benefits:Precision: Ensures that the K-wire is placed at the correct location and angle, which is crucial for proper alignment and stabilization of the fracture.Temporary Fixation: The K-wire temporarily holds bone fragments in place, allowing the surgeon to adjust the positioning before permanent fixation.Ease of Use: The centering sleeve simplifies the process of placing the K-wire, improving surgical efficiency and reducing the risk of misalignment.Compatibility: Specifically designed for use with small fragment locking plates and 1.25mm K-wires.Usage:Attachment:
The centering sleeve is inserted into the appropriate hole in the locking plate, aligning with the intended path for the K-wire.K-wire Insertion:
A 1.25mm K-wire is inserted through the centering sleeve and into the bone. The sleeve ensures that the wire follows the correct path, providing precise placement.Temporary Stabilization:
The K-wire temporarily stabilizes the bone fragments, allowing the surgeon to adjust the plate and prepare for permanent screw fixation.Final Fixation:
Once the alignment is confirmed, the K-wire can be removed, and the permanent screws can be inserted to secure the locking plate.Summary:The centering sleeve for a 1.25mm K-wire is an essential tool in orthopedic surgeries involving small fragment locking plates. It ensures the precise and accurate placement of K-wires, which are used for temporary fixation and alignment of bone fragments. This tool enhances surgical efficiency and accuracy, leading to better outcomes in fracture fixation and patient recovery.

The Orthopedic Locking T Plate (Right Angled) made from SS316L (Surgical Grade Stainless Steel) is a specialized implant used in orthopedic surgeries. Here’s a detailed breakdown:
Features:Material:Made from SS316L, which is surgical-grade stainless steel, ensuring biocompatibility, strength, and resistance to corrosion.Design:Right-angled T shape: Facilitates fixation in specific anatomical regions, such as the distal radius, small bones, or other areas requiring a T-plate configuration.Locking holes: Designed to accommodate 3.5 mm locking screws, which provide angular stability and prevent screw loosening.Size Compatibility:Typically compatible with 3.5 mm cortical or locking screws, depending on the fracture pattern and surgeon's choice.Applications:Fracture Fixation: Used for fixation of small and medium-sized bones, particularly in regions requiring precise stabilization.Osteotomies: Helpful in stabilizing bones after a surgical cut or removal of bone tissue.Nonunion/Malunion: Assists in correcting bone alignment and promoting healing.Specific Areas:Distal radiusMetacarpals and metatarsalsSmall joint fracturesAdvantages:Locking Mechanism:Provides angular stability, reducing the risk of implant failure.Minimizes the need for precise plate-bone contact, preserving periosteal blood supply.Durable Material:SS316L ensures longevity and minimal risk of adverse reactions.Specifications:Thickness: Generally around 3.5 mm to accommodate screws of similar diameter.Length and Holes: Available in multiple sizes and hole configurations (e.g., 2, 4, 6 holes), catering to various surgical needs.If you need detailed guidance on sizing, application, or procurement, let me know!

The Orthopedic Spine Vice Gripe Surgical Instrument is a specialized tool used in spine surgery for gripping, manipulating, or stabilizing spinal implants, hardware, or bone fragments during procedures like spinal fusion or corrective surgeries.
Key Features:Material: High-quality surgical-grade stainless steel (often SS316L) for durability, sterilization, and resistance to corrosion.Design:Jaws: The jaws are designed to securely grip without slipping, typically featuring a textured or serrated surface for enhanced grip strength on screws, rods, or plates.Locking Mechanism: Some models may include a locking mechanism to hold implants or instruments in place, allowing the surgeon to work hands-free or reduce movement.Ergonomic Handle: Typically equipped with an ergonomically designed handle for better control and comfort during long surgeries.Curved or Straight Options: Available in various configurations (curved or straight) to suit different surgical needs and areas of the spine.Length: Comes in varying lengths to accommodate deep or superficial spinal structures, depending on the specific surgery.This instrument ensures a strong and stable grip, essential for precise and safe manipulation of spinal hardware during complex procedures.

Titanium Straight Pelvic Reconstruction Plate 3.5mm

Jindal Medi Surge is a CE and ISO Certified Leading Manufacturer, Exporter of Surgical and Orthopedic Instruments used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum & Carbon Fiber Only. Our products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.

For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Branded & also Manufacture on an OEM basis for various international brands.

TITANIUM  Cannulated Cancellous Screw  2

Jindal Medi Surge is a CE and ISO Certified leading Manufacturer and Exporter of Surgical and Orthopedic / Orthopaedic Instruments used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum, Titanium & Carbon Fiber Only. Our Products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.

For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Brand & also Manufacture on OEM basis for various international brands.

Veterinry Fessa Tube  6mm x 45mm

Jindal Medi Surge is a CE and ISO Certified Leading Manufacturer, Exporter of Surgical and Orthopedic Instruments used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum & Carbon Fiber Only. Our products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.
For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Branded & also Manufacture on an OEM basis for various international brands.

The Orthopedic Broad Curved Plate LCP 5.0mm SS316L is a high-strength implant used in orthopedic surgery for stabilizing fractures in anatomically broader or curved regions of the skeleton. Below are the details of the plate:
Features:Material:
SS 316L: Surgical-grade stainless steel (316L) ensures biocompatibility, high corrosion resistance, and mechanical durability for safe and effective implantation.Design:
Broad Plate: Provides enhanced coverage and stability, suitable for areas with larger bone cross-sections or complex fractures requiring greater support.Curved Shape: Pre-contoured to match the natural anatomical curvature of bones like the femur, tibia, or other long bones, minimizing the need for intraoperative adjustments.Locking Compression Plate (LCP):Combines locking screw technology for angular stability with dynamic compression capabilities for secure fracture fixation.Thickness:
5.0mm: Refers to the diameter of the screws used with the plate, compatible with 5.0mm locking and cortical screws.Hole Configuration:
Equipped with combination holes, allowing surgeons to use both:Locking screws: For angular stability.Cortical screws: For compression and lag fixation.Radiolucency:
Fully compatible with imaging techniques (e.g., X-rays, fluoroscopy) for accurate surgical placement and post-operative assessment.Indications:The Broad Curved Plate LCP is used for fractures requiring greater coverage and support, such as:
Diaphyseal Fractures: Mid-shaft fractures of long bones like the femur or tibia.Comminuted Fractures: Fractures with multiple bone fragments.Metaphyseal and Periarticular Fractures: Fractures near joints that need precise alignment and strong stabilization.Osteoporotic Bones: Provides reliable fixation in bones with poor quality due to the angular stability of locking screws.Advantages:Enhanced Stability:Broad plate design distributes forces over a wider area, reducing stress concentration and the risk of implant failure.Angular Stability:Locking screws create a fixed-angle construct, particularly beneficial for osteoporotic or fragile bone conditions.Custom Fit:Pre-contoured design reduces intraoperative bending and minimizes irritation to surrounding soft tissues.Versatility:Combination holes allow the surgeon to choose between locking or compression screws for flexible fixation techniques.Early Mobilization:Stable fixation allows patients to begin post-operative rehabilitation sooner.Applications:Commonly used for:Femoral Shaft Fractures: Broad plates are ideal for larger cross-sectional areas requiring robust fixation.Tibial Shaft Fractures: Stabilizes fractures along the length of the tibia.Pelvic Fractures: Provides reliable fixation for large, complex fracture patterns.Humerus Fractures: In regions requiring broader plates for better coverage.Screw Compatibility:5.0mm Locking Screws: For locking fixation with angular stability.5.0mm Cortical Screws: For compression and lag screw fixation.Sizes and Options:Lengths: Typically available in multiple lengths (e.g., 4-hole, 6-hole, 8-hole, etc.) to accommodate various fracture patterns.

The Orthopedic Cortical Screw 3.5mm Diameter Self-Tapping Titanium is a robust surgical implant commonly used for orthopedic fixation in dense cortical bone. Below are its key details:
SpecificationsDiameter: 3.5mm.Material: Titanium.Biocompatible, corrosion-resistant, and lightweight, suitable for long-term implantation.Thread Type: Cortical thread.Designed to anchor securely in cortical bone with high holding power.Self-Tapping Feature:Incorporates cutting flutes at the tip, eliminating the need for pre-tapping and reducing surgical steps.Head Type:Available as hex, cross-head (Phillips), or star drive for precise insertion and torque control.Length: Typically available in a range from 10mm to 75mm (or longer) to accommodate various surgical needs.Sterility: Offered in sterile or non-sterile forms (non-sterile requires autoclaving before use).Key FeaturesSelf-Tapping Design:Simplifies surgical procedures by reducing the need for pre-tapping tools.High Tensile Strength:Strong enough to withstand mechanical stresses without deformation or failure.Precision Machining:Sharp threads ensure secure fixation while minimizing bone damage.Radiolucency:Titanium material allows for clear postoperative imaging (e.g., X-rays) without significant interference.Corrosion Resistance:Ensures longevity and stability for permanent or semi-permanent fixation.ApplicationsFracture Fixation:Commonly used for fractures in larger bones such as the humerus, femur, tibia, and fibula.Plate Fixation:Secures orthopedic plates during internal fixation procedures like ORIF (Open Reduction Internal Fixation).Osteotomies:Stabilizes bone-cutting and alignment surgeries.Trauma and Reconstruction:Used in trauma cases and for reconstructive orthopedic procedures.Versatile Use:Suitable for both adult and pediatric orthopedic applications in areas requiring strong fixation.AdvantagesEfficiency in Surgery:The self-tapping feature reduces operative time and eliminates the need for additional steps.Biocompatibility:Titanium minimizes risks of allergic reactions and is well-tolerated by the body.Long-Term Durability:High resistance to wear and corrosion ensures longevity in the body.Versatility:The 3.5mm diameter and self-tapping design make it ideal for both load-bearing and non-load-bearing applications.Would you like additional information about specific surgical techniques, dimensions, or purchasing options?

The Orthopedic Locking Clavicle Hook Plate 3.5mm is a specialized implant designed for the treatment of lateral clavicle fractures, acromioclavicular (AC) joint dislocations, and related injuries. Its hook-based design and locking mechanism ensure secure fixation and effective stabilization. Here's a detailed description:
Key FeaturesMaterialConstructed from SS316L (Surgical Stainless Steel), offering excellent strength, biocompatibility, and corrosion resistance.Locking TechnologyEquipped with locking screw holes to provide angular stability and reduce dependency on bone quality.Hook DesignFeatures a hook at the distal end, designed to engage under the acromion for stabilization of the AC joint or distal clavicle fractures.Reduces stress on the lateral fragment, promoting fracture healing and AC joint stability.Anatomical FitPre-contoured for the natural anatomy of the clavicle and available in left and right variants.Screw CompatibilityCompatible with 3.5mm cortical screws and locking screws, allowing for versatile fixation.IndicationsThe clavicle hook plate is ideal for:
Lateral Clavicle Fractures:Including Neer type II fractures.AC Joint Dislocations:Stabilization of acute AC joint injuries.Distal Clavicle Fractures:Particularly in cases involving ligament injury or instability.Non-Union or Malunion:Reconstruction of previously unhealed fractures.Clinical AdvantagesStabilization Without Excessive Compression:Hook design avoids over-compression of the AC joint or lateral clavicle.Minimized Stress:Distributes forces to reduce implant failure and improve patient outcomes.Anatomical Design:Reduces intraoperative bending and ensures a better fit.Enhanced Fixation:Locking mechanism offers reliable fixation in osteoporotic or comminuted bones.Postoperative Recovery:Promotes early mobilization while maintaining stability.ConsiderationsThe hook under the acromion may require removal after healing to avoid impingement or discomfort.Postoperative imaging is essential to monitor plate positioning and healing progress.Would you like detailed specifications, surgical techniques, or additional product variants?

4.35mm Revision Graft Screw Titanium4.SI599.14 14mm4.SI599.15 16mm4.SI599.15 18mm

Orthopedic 4.35mm Revision Graft Screw Titanium Spine Implant SpecificationsMaterial:
Made from medical-grade titanium alloy (commonly Ti6Al4V or Ti6Al4V ELI).Design:
Specifically designed for use in spinal revision surgeries where graft fixation is required.Features a 4.35mm diameter to provide a balance between strength and minimal invasiveness.Self-tapping or self-drilling tip to facilitate easy insertion and secure anchoring in the bone graft and surrounding vertebral bodies.Dimensions:
Diameter: 4.35mm.Length: Available in various lengths to accommodate different patient anatomies and surgical requirements, typically ranging from 10mm to 40mm.Features:
Threaded design to provide secure fixation in the graft material and vertebral bone.Screw head designed to be compatible with standard instrumentation for easy insertion and removal.Low-profile head design to minimize soft tissue irritation and interference with adjacent anatomical structures.Radiopaque markers to assist with precise intraoperative and postoperative imaging.High fatigue strength to withstand the mechanical stresses of the spine.Intended Use:
Used in spinal revision surgeries to provide stable fixation of bone grafts.Commonly indicated for conditions such as failed spinal fusions, graft migrations, and other revision scenarios requiring additional stability.Sterilization:
Supplied sterile or non-sterile, based on manufacturer specifications.If provided non-sterile, they can be sterilized using standard autoclave methods.Compatibility:
Designed to be compatible with standard surgical instrumentation and other spinal fixation devices.Regulatory Compliance:
Must comply with international standards such as ISO 13485 for medical devices.Compliance with specific regional regulations like FDA approval (for the USA) or CE marking (for Europe).

Anterior Cervical Plate 8 Holes Titanium4.SI512.42 42.50mm4.SI512.421 44mm4.SI512.43 45.00mm4.SI512.431 47mm4.SI512.44 47.50mm4.SI512.45 50.00mm4.SI512.451 51mm4.SI512.46 52.50mm4.SI512.461 53mm4.SI512.47 55.00mm4.SI512.471 56mm4.SI512.48 57.50mm4.SI512.481 59mm4.SI512.49 60.00mm4.SI512.491 62mm4.SI512.50 62.50mm4.SI512.51 65.00mm4.SI512.52 68mm4.SI512.53 70mm4.SI512.54 73mm4.SI512.55 76mm4.SI512.56 79mmOrthopedic Anterior Cervical Plate with 8 Holes Titanium Spine Implant SpecificationsMaterial:
Made from medical-grade titanium alloy (commonly Ti6Al4V or Ti6Al4V ELI).Design:
Anterior cervical plate designed for spinal fixation and stabilization.Features 8 holes to accommodate screws for secure fixation to multiple cervical vertebrae.Anatomically contoured to match the natural curvature of the cervical spine.Low-profile design to minimize soft tissue irritation and reduce the risk of dysphagia.Dimensions:
Length: Varies to accommodate different levels of fusion, typically ranging from 50mm to 90mm.Width: Approximately 15mm to 20mm.Thickness: Typically around 2mm to 3mm.Features:
Screw holes with variable angle capabilities to allow for optimal screw placement and purchase in the vertebral bodies.Locking mechanisms such as locking caps or screws to prevent screw back-out and ensure stability.Radiopaque markers or indicators for precise intraoperative and postoperative imaging.Slots or grooves to facilitate bone grafting and enhance fusion.Self-tapping or self-drilling screw options for ease of insertion and secure anchoring.Intended Use:
Used in anterior cervical spinal fusion procedures to provide stability and support to the cervical spine.Commonly indicated for conditions such as degenerative disc disease, trauma, tumors, and deformities.Sterilization:
Supplied sterile or non-sterile, based on manufacturer specifications.Can be sterilized using standard autoclave methods if provided non-sterile.Compatibility:
Designed to be compatible with specific anterior cervical screws, typically of varying lengths and diameters to match patient anatomy and surgical requirements.Regulatory Compliance:
Must comply with international standards such as ISO 13485 for medical devices.Specific regional regulations like FDA approval (for the USA) or CE marking (for Europe) must be met.

STAINLESS STEEL NARROW DCP PLATE

Jindal Medi Surge is a CE and ISO Certified leading Manufacturer and Exporter of Surgical and Orthopedic / Orthopaedic Instruments used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum, Titanium & Carbon Fiber Only. Our Products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.

For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Brand & also Manufacture on OEM basis for various international brands.

LOCKING POSTERIOR MEDIAL TIBIA PLATE 3.5MM 

Jindal Medi Surge is a CE and ISO Certified leading Manufacturer and Exporter of Surgical and Orthopedic / Orthopaedic Instruments and Devices used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum, Titanium & Carbon Fiber Only. Our Products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.

For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Brand & also Manufacture on OEM basis for various international brands.

Bender Reconstruction Plate

Jindal Medi Surge is a CE and ISO Certified leading Manufacturer and Exporter of Surgical and Orthopedic / Orthopaedic Instruments used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum, Titanium & Carbon Fiber Only. Our Products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.

For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Brand & also Manufacture on OEM basis for various international brands.

Cannualted Cancellous screw 32mm Thread Stainless Steel

4109.1117 Length 35mm4109.1118 Length 40mm4109.1119 Length 45mm4109.112 Length 50mm4109.1121 Length 55mm4109.1122 Length 60mm4109.1123 Length 65mm4109.1124 Length 70mm4109.1125 Length 75mm4109.1126 Length 80mm4109.1127 Length 85mm4109.1128 Length 90mm4109.1129 Length 95mm4109.113 Length 100mm4109.1131 Length 105mm4109.1132 Length 110mmJindal Medi Surge is a CE and ISO Certified Leading Manufacturer, Exporter of Surgical and Orthopedic Instruments used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum & Carbon Fiber Only. Our products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.

For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Branded & also Manufacture on an OEM basis for various international brands.

Kirschner Wire with Trocar Tip Orthopedic Implant Jindal Medi Surge's Pins are used in fixation of fractures where minimal bone and soft tissue damage are involved, they provide provisional fixation leaving room for additional hardware placement. The provisional fixation is planned to avoid faulty permanent fixation. Depending on the diameter, pins may also be used as guide wires for cannulated screw fixation. Jindal Medi Surge are manufacturer's of widest range & sizes of Wire Implants, used in various trauma/orthopedic surgeries. All Wires are made from S.S.316L raw material. Jindal Medi Surge's Staples are used for fragment fixation, where inter-fragmental screw fixation is difficult. They are an effective internal fixation method and are widely used in foot and ankle surgery. The staples are also used in fixation of soft tissues to bone.
Kirschner Wire With Double Trocar TipDia. 0.6mm, Length 150mmDia. 0.8mm, Length 70mmDia. 0.8mm, Length 100mmDia. 0.8mm, Length 150mmDia. 0.8mm, Length 300mmDia. 0.8mm, Length 310mmDia. 0.9mm, Length 70mmDia. 0.9mm, Length 100mmDia. 0.9mm, Length 150mmDia. 0.9mm, Length 300mmDia. 1.0mm, Length 100mmDia. 1.0mm, Length 150mmDia. 1.0mm, Length 175mmDia. 1.0mm, Length 200mmDia. 1.0mm, Length 225mmDia. 1.0mm, Length 230mmDia. 1.0mm, Length 300mmDia. 1.0mm, Length 310mmDia. 1.1mm, Length 100mmDia. 1.1mm, Length 150mmDia. 1.1mm, Length 225mmDia. 1.1mm, Length 300mmDia. 1.2mm, Length 60mmDia. 1.2mm, Length 100mmDia. 1.2mm, Length 120mm

1.0mm Threaded Guide Wire SS316L1.2mm Threaded Guide Wire SS316L1.4mm Threaded Guide Wire SS316L1.5mm Threaded Guide Wire SS316L1.6mm Threaded Guide Wire SS316L1.8mm Threaded Guide Wire SS316L2.0mm Threaded Guide Wire SS316L2.5mm Threaded Guide Wire SS316L3.0mm Threaded Guide Wire SS316L Threaded Guided Wire Orthopedic Implant Jindal Medi Surge's Pins are used in fixation of fractures where minimal bone and soft tissue damage are involved, they provide provisional fixation leaving room for additional hardware placement. The provisional fixation is planned to avoid faulty permanent fixation. Depending on the diameter, pins may also be used as guide wires for cannulated screw fixation. Jindal Medi Surge are manufacturer's of widest range & sizes of Wire Implants, used in various trauma/orthopedic surgeries. All Wires are made from S.S.316L raw material. Jindal Medi Surge's Staples are used for fragment fixation, where inter-fragmental screw fixation is difficult. They are an effective internal fixation method and are widely used in foot and ankle surgery. The staples are also used in fixation of soft tissues to bone. 1.0 mm Threaded Guide Wire100 mm Length125 mm Length150 mm Length175 mm Length200 mm Length225 mm Length

The F-tool is an orthopedic instrument specifically designed for use with titanium elastic nails (TENs) in fracture fixation procedures. This tool is crucial for manipulating and controlling the position of elastic nails during insertion and adjustment within the bone, ensuring accurate alignment and stabilization of fractures, particularly in long bones.
Specifications and Uses:F-Tool:
Design: Shaped like the letter "F," this tool typically features a handle and prongs or hooks that engage with the titanium elastic nail. The design allows for precise manipulation and control of the nail.Material: Made from high-strength, durable materials such as stainless steel to ensure reliability and withstand repeated sterilization.Function: Used to adjust, guide, and control the insertion of titanium elastic nails into the bone, ensuring proper alignment and fixation.Titanium Elastic Nails (TENs):
Material: Constructed from titanium, offering the necessary flexibility and strength.Use: Utilized for stabilizing fractures in long bones, particularly in pediatric patients, due to their elastic properties that promote natural bone healing.Key Features and Benefits:Precision Control: The design of the F-tool allows for precise manipulation and control of the titanium elastic nails, ensuring accurate placement and alignment within the bone.Versatility: Compatible with various sizes of titanium elastic nails, making it suitable for a wide range of orthopedic procedures.Durability: Constructed from high-quality materials to ensure longevity and reliability, even under repeated use and sterilization.Ergonomic Design: The handle is designed for a comfortable grip, reducing hand fatigue and providing better control during the procedure.Enhanced Stability: Ensures the nails are properly positioned and secured, improving the stability of the fracture fixation and promoting effective healing.Usage:Preparation:
Select the appropriate size of titanium elastic nail based on the fracture and patient size.Ensure that the F-tool is clean and sterile before use.Engagement:
Engage the prongs or hooks of the F-tool with the elastic nail. Ensure a secure fit to maintain control over the nail during manipulation.Insertion and Adjustment:
Use the F-tool to guide and adjust the position of the elastic nail as it is inserted into the bone. The tool allows for precise control over the angle and depth of insertion.Apply gentle pressure and adjustments as needed to ensure the nail follows the correct path within the bone's medullary canal.Final Positioning:
Once the nail is in the desired position, use the F-tool to make any necessary final adjustments to ensure proper alignment and stability.Remove the F-tool after the nail is securely placed and the fracture is adequately stabilized.Summary:The F-tool is a vital orthopedic instrument designed for the precise manipulation and control of titanium elastic nails during fracture fixation procedures. Its ergonomic design, durability, and versatility make it an indispensable tool for ensuring accurate nail placement and effective fracture stabilization, particularly in pediatric patients. By providing enhanced control and stability, the F-tool contributes to improved surgical outcomes and promotes natural bone healing.

The Orthopedic Cervical Instrument Set is a comprehensive collection of specialized tools designed for cervical spine surgeries. This set includes all the necessary instruments to perform various procedures on the cervical spine, such as decompression, fusion, disc replacement, and stabilization. It is typically organized in a sterilizable tray or box for easy access and efficient workflow in the operating room.
Key Components:Instrument Tray/Box:Material: Stainless steel or aluminum, known for durability and corrosion resistance.Design: Divided into compartments to organize and securely hold each instrument.Sterilization: Designed to withstand steam sterilization, ensuring all instruments are sterile for use.Common Instruments Included:Retractors:
Types: Includes various retractors like Caspar, Cloward, or Taylor retractors.Purpose: Used to hold back soft tissue, muscles, and other structures to provide clear access to the cervical spine.Design: Available in different sizes and shapes to suit various surgical approaches.Discectomy Instruments:
Rongeurs: Pituitary and Kerrison rongeurs for removing disc material and small bone fragments.Curettes: Used to scrape out the intervertebral disc material during discectomy procedures.Nerve Hooks: To gently manipulate nerves and other soft tissues away from the surgical site.Screwdrivers:
Purpose: Used for the insertion and tightening of cervical screws in spinal fusion or fixation procedures.Design: Compatible with different types of screws, such as lateral mass screws, pedicle screws, or cervical plate screws.Drill Bits and Awls:
Function: Drill bits are used to create pilot holes in the vertebrae for screw placement.Awls: Used to start the hole or guide the drill bit to the correct location.Sizes: Available in various diameters to match different screw sizes.Taps:
Purpose: Prepares the bone by creating threads in the drilled holes before screw insertion.Design: Ensures a secure fit for the screws, preventing loosening post-surgery.Cervical Plate Holders and Inserters:
Function: Designed to hold and insert cervical plates during anterior cervical fusion surgeries.Stabilization: Helps align the plate accurately over the vertebrae before screw fixation.Bone Graft Instruments:
Curettes and Scoops: For harvesting and placing bone graft material in fusion procedures.Bone Tampers: Used to compact the bone graft into the desired location.Rod Holders and Benders:
Purpose: In procedures involving cervical rods, these instruments help in shaping and positioning the rods correctly.Design: Ergonomically designed for precise control during rod contouring and placement.Cervical Distractors:
Caspar Distractor: Commonly used in anterior cervical discectomy and fusion (ACDF) to separate vertebrae and allow for disc removal.Design: Adjustable to accommodate different vertebral heights.Cervical Curettes and Osteotomes:
Function: Used to remove bone or soft tissue, particularly in decompression surgeries.Design: Available in various sizes and shapes to match different anatomical needs.Hooks and Rods:
Purpose: Used in posterior cervical fixation surgeries, where hooks are placed around the lamina or pedicle, and rods are used to stabilize the spine.Compatibility: Designed to work seamlessly with lateral mass screws and other cervical fixation systems.Measuring Instruments:
Calipers: For measuring the depth and size of holes, screws, or bone grafts.Depth Gauges: Ensures accurate screw placement and prevents over-penetration.Hemostats and Clamps:
Function: Various clamps and hemostats to control bleeding and hold tissue in place during surgery.Design: Available in different lengths and tip configurations to match the surgeon's needs.

The Orthopedic Cannulated Cancellous Screw with a 4.5mm diameter and full thread, made of titanium, is a specialized surgical screw commonly used in orthopedic procedures. Here's a detailed overview:
Specifications:Diameter:
4.5mm (consistent with medium-sized fixation screws for cancellous bone).Threading:
Full Thread: Extends along the entire length of the screw, providing secure fixation and load distribution across the bone fragments.Material:
Titanium: Offers excellent biocompatibility, high strength, lightweight properties, and resistance to corrosion.Cannulated Design:
A hollow center (cannulation) allows the screw to be guided over a guide wire during placement, ensuring precision in minimally invasive surgeries.Applications:
Suitable for fixation in cancellous (spongy) bone, such as metaphyseal regions.Used in fractures, osteotomies, and non-unions where strong yet precise fixation is required.Lengths:
Available in varying lengths to suit different anatomical and procedural requirements.Head Design:
Typically a hexagonal or cruciform head to facilitate secure engagement with a driver.Advantages:Ensures accurate placement due to its compatibility with guide wires.Full thread design offers enhanced stability, particularly in cases requiring compression.Titanium's properties promote reduced risk of allergic reactions and imaging artifacts.Would you like information on its surgical application, sizes, or compatibility with instruments?

Veterinary Fessa Tube


Developed for use in the French army FESSA is a lightweight tubular fixator with a number of interesting features. Standard Stainless Steel FESSA is very light. The tubular structure acts as both clamp and bar. The tube incorporates the pin clamping mechanism and is thus very strong and has extremely good angular pin rigidity. Available in 6 and 8mm & 12mm diameter Tubes. 6mm Tube accepts pins of shaft diameter 0.9mm to 1.8mm making it extremely useful in the management of fractures in cats and exotics. 8mm Tube accepts pins of shaft diameter 1.6mm to 3.2mm. 12mm Tube accepts pins of shaft diameter up to 4mm and M5 Grub Screws. Design allows placement of multiple parallel pins close together in small fragments. Pins can be placed at right angles to tube or angled through adjacent holes. Pins are locked into position by hex driven grub screws. The FESSA Stainless Steel Starter Kit contains the following: One of each 6mm tube and one of each 8mm tube (6 in total) 1 x 6mm Hinge and one 8mm Hinge 1 x 1.5mm Hex Screwdriver 1 x 2.0mm Hex Screwdriver 10 x 1.5 Locking Screws 10 x 2.0 Locking Screws. All Jindal Medi Surge Orthopedic Veterinary Fessa Tubes are made from medical grade raw material only.

Cannulated Cancellous Screw 7.0mm

Jindal Medi Surge is a CE and ISO Certified leading Manufacturer and Exporter of Surgical and Orthopedic / Orthopaedic Instruments used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum, Titanium & Carbon Fiber Only. Our Products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.

For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Brand & also Manufacture on OEM basis for various international brands.

Locking Extra Articular Small T Plate Right Angled 2.7mm Orthopedic ImplantJindal Medi Surge Orthopedic large fragment locking plates offers the advantages of locked Plating with the flexibility and benefits of traditional Plating in one system. Offering both locked and non-locking screw options provides a construct that resists angular (varus, value, torsional, and axial) collapse while simultaneously acting as a fracture reduction. Large fragment locking system can be used in adult and pediatric patients as well as patients with osteopenic bone. It is indicated for fixation of pelvic, small & large bone fractures, including those of the tibia, fibula, femur, pelvis, acetabulum metacarpals, metatarsals, humerus, ulna, and calcaneus. Locking Plates have the following feature:- Uniform hole spacing, Load (compression) and neutral Screw propitious, Combination of locking & compression holes, Combi holes allow placement of Conventional Cortical & cancellous bone Screw on one side or threaded conical locking screw on the opposite side of each hole. All implants are made from Medical grade stainless steel & titanium.

The Orthopedic 7.0mm Locking Head Cannulated Cancellous Screw with Full Thread in Titanium is a specialized screw used in orthopedic surgeries for the secure fixation of fractures in cancellous (spongy) bone. The design of the screw features a locking head, cannulated shaft, and full thread, along with the biocompatible Titanium material, making it an advanced choice for providing stable fixation in bone repair procedures.
Key FeaturesMaterial:
Titanium (Grade 5 or equivalent):Biocompatibility: Titanium is known for its excellent compatibility with human tissues, reducing the risk of allergic reactions or complications after implantation.Corrosion Resistance: Titanium’s resistance to corrosion ensures the screw remains functional over time, even in the challenging environment of the human body.Strength and Lightweight: Titanium is both strong and lightweight, making it ideal for orthopedic implants as it provides strong fixation without adding unnecessary weight to the bone.Design Features:
Locking Head:The screw has a locking head that interacts with locking plates, creating a fixed-angle construct. This design prevents screw loosening and provides enhanced stability, especially in cases of osteoporotic or weakened bone.Cannulated Shaft:The screw is cannulated, meaning it has a hollow core that allows for guided insertion over a guidewire. This helps in placing the screw more accurately and reduces the risk of errors during surgery.Full Thread Design:The full thread extends across the entire length of the screw, providing optimal purchase in the cancellous bone. This increases the screw's holding power and stabilizes the bone fragments effectively.Self-Tapping:The screw is self-tapping, meaning it forms its own threads as it is inserted into the bone, eliminating the need for pre-tapping and speeding up the surgical procedure.Dimensions:
Diameter: 7.0mm, ideal for use in larger bones such as the femur, tibia, humerus, and pelvis.Full Thread: The screw’s full thread ensures maximum engagement with the bone for greater fixation strength.Length: Available in various lengths (typically 20mm to 50mm or more) to accommodate different fracture types and anatomical requirements.Thread Length: Fully threaded, ensuring deep penetration into cancellous bone, maximizing fixation strength.Drive Mechanism:
The screw features a hexagonal drive, ensuring a secure connection to the screwdriver and reducing the chance of slipping or misalignment during insertion.ApplicationsFracture Fixation:
Cancellous Bone Fractures: Best for cancellous bone fractures in large bones such as the femur, tibia, humerus, and pelvis, where secure fixation is critical for proper healing.Periprosthetic Fractures: Effective for fractures occurring around joint implants, such as hip or knee replacements, offering strong fixation during the healing process.Clavicle Fractures: Suitable for clavicle fractures, stabilizing the fractured bone and ensuring proper alignment for healing.Spinal Fractures: The screw can be used in spinal fractures, providing stabilization to the vertebrae and promoting bone healing.Osteotomy and Joint Reconstruction:

The Orthopedic 7.0mm Locking Head Cannulated Cancellous Screw 16mm Thread Titanium is a specialized screw designed for use in orthopedic procedures to secure fractures in cancellous (spongy) bone. The screw features a locking head mechanism, making it ideal for providing stable fixation in osteoporotic bone or fractures requiring high stability. It is made from Titanium, a highly biocompatible, strong, and lightweight material that ensures durability and minimal reaction with human tissues.
Key FeaturesMaterial:
Titanium (Grade 5 or equivalent):Biocompatible: Titanium is known for its excellent compatibility with human tissue, reducing the likelihood of irritation or rejection.Corrosion-Resistant: Titanium is highly resistant to corrosion, ensuring the screw remains intact in the body for long periods without degrading.Strength and Lightweight: The screw provides optimal strength while remaining lightweight, which reduces additional stress on the surrounding bone and tissues.Screw Design:
Locking Head:The screw features a locking head that creates a fixed-angle construct when used with a locking plate. This feature ensures a more stable fixation, especially in weak or osteoporotic bone, by preventing the screw from loosening or backing out over time.Cannulated Design:The screw is cannulated, meaning it has a central hollow channel, which allows for guided insertion over a guidewire. This makes the procedure less invasive and more precise, ensuring the screw is placed in the correct location.16mm Thread Length:The screw has a 16mm thread length, which is ideal for deep engagement with cancellous bone, providing a secure hold and promoting better stability for bone healing.Self-Tapping:The screw is self-tapping, meaning it can cut its own threads as it is inserted, eliminating the need for pre-tapping and reducing the surgical time.Screw Diameter and Length:
Diameter: 7.0mm, which is suitable for larger bones such as the femur, tibia, humerus, and pelvis.Thread Length: 16mm, ideal for providing deep engagement and strong fixation in cancellous bone.Length: The screw comes in various lengths (typically ranging from 20mm to 50mm or more) to accommodate different fracture types and bone anatomies.Hexagonal Drive:
The screw is equipped with a hexagonal drive, ensuring a secure and controlled insertion during surgery, reducing the risk of slippage or damage to the screw head.ApplicationsFracture Fixation:
Cancellous Bone Fractures: The screw is ideal for securing fractures in cancellous bone of larger bones such as the femur, tibia, humerus, and pelvis, where more stability is required.Periprosthetic Fractures: Often used in fractures around joint implants (e.g., hip, knee), providing strong fixation to maintain joint stability while the bone heals.Clavicle Fractures: Can be used for fractures of the clavicle, offering strong, stable fixation to ensure the bone heals correctly.Spinal Fractures: The screw can be used in spinal fracture fixation to stabilize vertebrae and promote proper healing.Osteotomy and Joint Reconstruction:

15mm Cervical Cage With Screw Peek 13878.005 5 MM13878.006 6 MM13878.007 7 MM13878.008 8 MM
The Orthopedic 15mm Cervical Cage with Screw PEEK Spine Implant is a specialized device used in cervical spinal fusion surgeries, particularly for Anterior Cervical Discectomy and Fusion (ACDF) procedures. This implant is designed to maintain the intervertebral disc height, ensure spinal stability, and promote bone fusion between the cervical vertebrae.
Key Specifications:Material:
PEEK (Polyether Ether Ketone): A high-performance, biocompatible polymer known for its strength, durability, and radiolucency. PEEK allows for clear postoperative imaging without interference from the implant.Size:
Diameter: The cage has a size specification of 15mm, which refers to its height or width, depending on the design and the specific anatomical requirements.Available Heights: Cages typically come in various heights (e.g., 5mm to 12mm) to match the patient’s disc space, though this specification might vary depending on the manufacturer.Design:
Cage Shape: Usually rectangular or anatomically shaped to fit the cervical intervertebral space, providing a stable base for fusion.Hollow Center: The cage features a hollow center that can be filled with autograft, allograft, or bone substitute material to promote osseointegration and facilitate bone fusion.Surface Texture: The surface may be roughened or textured to enhance bone integration and prevent migration of the cage.Lordotic Angle: Available with different lordotic angles (e.g., 7°, 12°) to help restore the natural cervical curvature and maintain proper spinal alignment.Screw Fixation:
Integrated Screws: The cage includes one or more integrated screws designed to fix the cage securely to the vertebral bodies, providing additional stability and preventing migration or subsidence of the implant.Screw Material: The screws are typically made of titanium, known for its high strength, biocompatibility, and compatibility with PEEK.Radiopaque Markers:
Markers: Radiopaque markers, often made of titanium or tantalum, are embedded within the cage to allow for precise placement verification and monitoring under imaging techniques like X-rays or CT scans.Applications:Anterior Cervical Discectomy and Fusion (ACDF):Procedure: The cage is used in ACDF surgeries to replace the removed intervertebral disc, restoring disc height, and maintaining spinal stability while the bone graft material inside the cage facilitates fusion between the vertebrae.Indications: This implant is typically indicated for conditions such as cervical disc herniation, degenerative disc disease, cervical spondylosis, and other conditions requiring spinal fusion to stabilize the cervical spine.The 15mm Cervical Cage with Screw PEEK Spine Implant is essential in cervical spine surgeries for achieving successful fusion, restoring spinal alignment, and ensuring long-term stability of the cervical vertebrae.

The VA LCP (Variable Angle Locking Compression Plate) Two Column Volar Distal Radius Plate is a specialized orthopedic implant used in the treatment of distal radius fractures. This instrument set is designed specifically for the surgical placement and fixation of this plate. Here’s an overview of what you might find in a VA LCP Two Column Volar Distal Radius Plate instruments set:
Components of a VA LCP Two Column Volar Distal Radius Plate Instrument SetVA LCP Two Column Volar Distal Radius Plate:
The main component, this plate is designed to stabilize and support fractures of the distal radius through its anatomically contoured shape and locking screw capabilities.Screws:
Locking Screws: These screws are designed to securely fix the VA LCP plate to the bone, providing stability and allowing for angular adjustments to optimize fracture reduction.Cortical Screws: Used in conjunction with the plate to provide additional stability in non-locking fashion.Instrumentation:
Plate Holder/Forceps: Used to grasp and manipulate the VA LCP plate during placement.Screwdrivers: Specific instruments designed to fit the heads of locking and cortical screws, facilitating precise insertion and tightening.Depth Gauge: Helps ensure accurate screw length and placement.Bone Preparation Tools:
Drill Guides: Assist in drilling holes precisely aligned with the plate's screw holes.Drill Bits: Sized appropriately for creating pilot holes in the bone before screw insertion.Soft Tissue Management Instruments:
Retractors: Instruments used to gently retract and hold soft tissues aside, providing clear visibility of the surgical site.Sterilization and Maintenance:
Instrument Tray: Organizes and holds the instruments during sterilization and surgical procedures, ensuring ease of access and organization.Sterilization Containers: Containers used for sterilizing and storing the instruments to maintain surgical sterility.ConsiderationsAnatomical Precision: The VA LCP Two Column Volar Distal Radius Plate is designed to closely match the anatomy of the distal radius, aiding in fracture reduction and stability.Specialized Use: This instrument set is tailored for specific procedures involving distal radius fractures and may vary slightly depending on the surgical approach and preferences of the orthopedic surgeon.Training: Surgeons and surgical staff should receive training in the use of these specialized instruments and implants to ensure safe and effective surgical outcomes.SummaryThe VA LCP Two Column Volar Distal Radius Plate instrument set is essential for orthopedic surgeries aimed at treating distal radius fractures. It includes a range of instruments and implants designed to provide stable fixation, facilitate precise surgical technique, and promote optimal healing of the fracture. Proper organization, sterilization, and familiarity with the instruments are crucial for achieving successful surgical outcomes and patient recovery in orthopedic procedures involving this specific implant.

The Orthopedic Hook Plate 4.5mm with DCP Holes is a specialized implant used in the management of fractures and reconstructive surgeries, particularly in areas requiring secure fixation near soft tissue or joint surfaces.
Key FeaturesHooked End Design:
The plate features a hooked end to facilitate fixation in specific anatomical regions.Commonly used for fractures near joints (e.g., clavicle, scapula, distal femur, or proximal humerus).Provides additional anchoring for soft tissue or bone fragments.Dynamic Compression Plate (DCP) Holes:
DCP holes allow for axial compression to enhance fracture healing.Compatible with 4.5mm cortical screws, enabling both locking and non-locking options.Material:
Made from SS316L (Stainless Steel 316L).Known for its corrosion resistance, biocompatibility, and durability.Applications:
Ideal for fractures near joint surfaces or small bone fragments requiring additional anchorage.Commonly applied in cases like:Distal femur fractures.Clavicular hook plate applications.Metaphyseal and periarticular fractures.Acromioclavicular joint stabilization.Versatile Design:
Available in various lengths to accommodate different fracture types.The pre-contoured shape ensures easy anatomical fit and reduces the need for intraoperative adjustments.Screw Compatibility:
Designed for use with both cortical and cancellous screws.Accommodates variable screw placement to meet diverse surgical needs.BenefitsProvides stable fixation in anatomically challenging regions.Enhances healing by maintaining precise alignment and anchorage.Durable and biocompatible material ensures long-term performance.Dynamic compression facilitates proper bone healing by promoting fragment contact.Technical NotesPreoperative imaging is essential to plan the plate's placement and length.Requires careful handling to avoid over-tightening screws near the hook to prevent soft tissue irritation.Intraoperative imaging may help confirm optimal positioning and screw placement.Would you like further information on its surgical use, sizes, or procurement details?