Jindal Medi Surge

End caps for humerus nails made from SS316L are used to close off the ends of the nail and provide additional stability. Here are the typical specifications:
Material: Stainless Steel 316LDesign:Shape: Typically rounded or conical to fit snugly against the end of the nailFunction: Provides closure to prevent ingress of debris and biological matter; may also enhance stability of the nail in the boneDimensions: Designed to match the diameter of the corresponding humerus nail; commonly available in sizes that fit 7mm, 8mm, and 9mm diameter nailsCorrosion Resistance: High, due to the SS316L material, ensuring durability and longevity in the bodySterility: Usually supplied sterile or can be sterilized before useApplication: Used to cap the ends of humerus nails to prevent infection and ensure a secure fit in the bone

809.101 PROXIMAL ZIG TIBIA-FEMUR809.102 DISTAL ZIG TIBIA809.103 DISTAL ZIG FEMUR809.104 CONICAL BOLT809.105 ZIGS CONNECTING BOLT809.106 SPANNER809.107 HAMMERING SET809.108 MEDULARY TUBE809.109 DEPTH GUAGE809.110 INTERLOCKING SCREW DRIVER809.111 TISUE PROTECTOR809.112 ZIG TIGHTENR ROD809.113 BONE AWL809.114 DRILL BIT 3.2809.115 DRILL BIT 4.2809.116 T-WRENCH809.117 TROCAR809.118 SLEEVE 3.2809.119 SLEEVE 4.2809.120 PROTECTION SLEEVE809.121 GUIDE WIRE HOLDING FORCP809.122 ALMUNIUM GRAPHIC BOXThe Interlocking Nail Instrument Graphic Set for tibia and femur (Fix-Zig type) is used in orthopedic surgical procedures for the fixation of fractures. Here are the typical components and specifications:
ComponentsGuide Wire:
Material: Stainless SteelDiameter: Typically 2.5mm or 3.0mmLength: Varies, often around 950mm to 1200mmReamer System:
Flexible or rigid reamersDiameter range: 8mm to 14mm in 0.5mm incrementsPower reaming attachmentInsertion Handle:
Ergonomic design for ease of useCompatible with both tibial and femoral nailsAiming Arm:
Precise alignment for proximal and distal lockingAdjustable to fit various nail lengths and diametersLocking Bolts/Screws:
Material: Stainless Steel 316L or TitaniumSelf-tapping screwsVarious lengths to match the nail diameter and patient anatomyDrill Bits:
Diameter: Typically 3.2mm, 4.0mmLength: Suited for the procedure, around 180mm to 300mmDepth Gauge:
For measuring the length of screwsT-Handle:
For manual reaming and screw insertionProximal and Distal Targeting Device:
Ensures accurate placement of locking screwsEnd Caps:
Material: Stainless Steel 316L or TitaniumVarious sizes to fit the nail diameterCannulated Drill Sleeves and Trocar:For precise drilling and screw placementSpecificationsCompatibility: Designed for both tibial and femoral interlocking nails (Fix-Zig type)Material: High-grade surgical stainless steel and titanium for various componentsSterilization: Components can be autoclavedDurability: High resistance to wear and corrosionApplicationUsage: Used in orthopedic surgical procedures to stabilize fractures in the tibia and femurBenefits: Provides comprehensive tools for accurate placement and stabilization of interlocking nails

Titanium Locking Bolt 4.9mm Self Tapping For Tibia & Femur Nail 

Jindal Medi Surge is a CE and ISO Certified leading Manufacturer and Exporter of Surgical and Orthopedic / Orthopaedic Instruments used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. All Products are made from Surgical Grade Stainless Steel, Aluminum, Titanium & Carbon Fiber Only. Our Products are used by Government Institutes, Private Hospitals, Small Clinics, Individual Doctors Worldwide.

For Bulk Order & Customized Listing, kindly message us.
We sell exclusively on our JMS Brand & also Manufacture on OEM basis for various international brands.

Rush Nail Dia. 3.0mm SS316L4186.30.10 Length 100mm4186.30.11 Length 110mm4186.30.12 Length 120mm4186.30.13 Length 130mm4186.30.14 Length 140mm4186.30.15 Length 150mm4186.30.16 Length 160mm4186.30.17 Length 170mm4186.30.18 Length 180mm4186.30.19 Length 190mm4186.30.20 Length 200mm4186.30.21 Length 210mm4186.30.22 Length 220mm4186.30.23 Length 230mm4186.30.24 Length 240mm4186.30.25 Length 250mm4186.30.26 Length 260mm4186.30.27 Length 270mm4186.30.28 Length 280mm4186.30.29 Length 290mm4186.30.30 Length 300mm4186.30.31 Length 310mm4186.30.32 Length 320mm4186.30.33 Length 330mm4186.30.34 Length 340mm4186.30.35 Length 350mm4186.30.36 Length 360mm4186.30.37 Length 370mm4186.30.38 Length 380mm4186.30.39 Length 390mm4186.30.40 Length 400mm
The Orthopedic Rush Nail with a diameter of 3.0mm made from SS316L is designed for intramedullary fixation of fractures in long bones. This type of nail is particularly useful in pediatric orthopedics but can also be used for certain adult fractures. Here are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it an ideal choice for medical implants.Design:
Flexible and Elastic: Allows the nail to bend and conform to the bone’s shape while providing stabilization for the fracture.Trocar Tip: A sharp tip that facilitates easier insertion into the medullary canal.Curved/Bowed Shape: Provides three-point fixation within the medullary canal, ensuring stability and maintaining reduction.Dimensions:
Diameter: 3.0mm.Length: Available in various lengths, typically ranging from 100mm to 500mm, to accommodate different patient anatomies and fracture types.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until opened for use in surgery.Indications:
Fractures: Suitable for diaphyseal fractures of long bones such as the femur, tibia, and humerus. Ideal for pediatric patients and specific adult cases.Minimally Invasive: Designed for use in minimally invasive surgical procedures, requiring smaller incisions compared to traditional plating methods.Components of the Rush Nail System:Rush Nails:
Multiple Sizes: Available in different diameters and lengths to meet the specific requirements of the patient and the fracture type.Insertion Instruments:
Inserter: A tool used to drive the Rush nail into the medullary canal.Benders: Instruments used to shape and contour the nail to fit the specific anatomy of the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the Rush nail after the bone has healed.Benefits:Minimally Invasive: Requires smaller incisions, leading to reduced soft tissue damage and faster recovery.Flexible Fixation: Provides stable fixation while allowing micromotion to promote bone healing.Versatility: Suitable for a wide range of fractures and patient sizes.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Pediatric Orthopedics: Ideal for treating long bone fractures in children due to their growth plates and the need for flexible fixation.Certain Adult Fractures: In specific cases where flexible intramedullary fixation is beneficial.The Orthopedic Rush Nail with a diameter of 3.0mm made from SS316L is a versatile and reliable implant for fracture fixation, providing the necessary support and flexibility to facilitate proper bone healing. Its design and material properties make it a preferred choice in both pediatric and adult orthopedic surgeries.

A locking plier for elastic nails is a specialized orthopedic instrument used to securely grip, manipulate, and control titanium elastic nails (TENs) during their insertion and adjustment in fracture fixation procedures. This tool is essential for ensuring the proper alignment and stabilization of fractures, particularly in long bones.
Specifications and Uses:Locking Plier:
Design: Features a mechanism that allows the pliers to lock onto the elastic nail securely. The design includes adjustable jaws and a locking mechanism that maintains a firm grip.Material: Made from high-strength, durable materials such as stainless steel to ensure longevity and withstand repeated sterilization.Function: Used to grip, manipulate, and hold titanium elastic nails in place during insertion, adjustment, and removal.Titanium Elastic Nails (TENs):
Material: Constructed from titanium, offering the necessary flexibility and strength for effective fracture stabilization.Use: Utilized for stabilizing fractures in long bones, particularly in pediatric patients, due to their elastic properties that promote natural bone healing.Key Features and Benefits:Secure Grip: The locking mechanism ensures a firm and stable grip on the elastic nail, preventing slippage during manipulation.Precision Control: Allows for precise control and manipulation of the elastic nails, ensuring accurate placement and alignment within the bone.Adjustability: The adjustable jaws accommodate various sizes of titanium elastic nails, making the tool versatile for different procedures.Durability: Constructed from high-quality materials to ensure reliability and longevity, even with repeated use and sterilization.Ease of Use: The ergonomic design provides a comfortable grip, reducing hand fatigue and improving control during the procedure.Usage:Preparation:
Select the appropriate size of titanium elastic nail based on the fracture and patient size.Ensure that the locking plier is clean and sterile before use.Engagement:
Adjust the jaws of the locking plier to fit the diameter of the titanium elastic nail.Engage the jaws around the nail and activate the locking mechanism to secure the grip.Insertion and Adjustment:
Use the locking plier to guide and adjust the position of the elastic nail as it is inserted into the bone. The tool allows for precise control over the angle and depth of insertion.Apply gentle pressure and make necessary adjustments to ensure the nail follows the correct path within the bone's medullary canal.Final Positioning:
Once the nail is in the desired position, use the locking plier to make any final adjustments to ensure proper alignment and stability.Release the locking mechanism and remove the plier once the nail is securely placed and the fracture is adequately stabilized.Removal (if needed):
To remove the titanium elastic nail, use the locking plier to securely grip the exposed end of the nail.Carefully manipulate the plier to extract the nail from the bone.Summary:The locking plier for elastic nails is a vital orthopedic instrument designed to provide a secure grip and precise control over titanium elastic nails during fracture fixation procedures. Its ergonomic design, adjustability, and durable construction make it an essential tool for ensuring accurate nail placement and effective fracture stabilization. By offering enhanced control and stability, the locking plier contributes to improved surgical outcomes and promotes natural bone healing, particularly in pediatric patients.

Orthopedic elastic nails, often used in pediatric and some adult fractures, provide flexible intramedullary fixation. Here's a detailed look at the specifications and characteristics of an Orthopedic Elastic Nail Titanium Nailing Implant:

 

Specifications and Characteristics:

Material:

 

Titanium Alloy: Ti-6Al-4V (Titanium Grade 5) for its excellent strength, biocompatibility, and corrosion resistance.

Design:

 

Flexible and Elastic: Designed to provide adequate stabilization while allowing some degree of natural bone movement and micromotion, which promotes healing.

Bowed Shape: Helps in maintaining the reduction and provides three-point fixation within the medullary canal.

Dimensions:

 

Diameter: Typically ranges from 2.0 mm to 4.5 mm.

Length: Varies, usually from 100 mm to 500 mm, depending on the application and patient anatomy.

Surface Finish:

 

Polished or Smooth Surface: To reduce friction during insertion and minimize soft tissue irritation.

Sterility:

 

Sterile Packaging: Pre-sterilized and packaged to ensure sterility until opened.

Indications:

 

Fractures: Used primarily for diaphyseal fractures of long bones (such as the femur, tibia, humerus) in pediatric patients.

Minimally Invasive: Allows for minimally invasive surgery with smaller incisions.

Components of the Elastic Nail System:

Elastic Nails:

 

Multiple Sizes: Available in various diameters and lengths to accommodate different fracture types and patient sizes.

Insertion Instruments:

 

Inserter: Device used to drive the elastic nail into the bone.

Benders: Tools used to shape and contour the nail to fit the specific anatomy of the medullary canal.

End Caps:

 

Optional: Used to prevent migration of the nail and to protect the nail tip.

Extraction Instruments:

 

Extractor: Device used to remove the elastic nail after the bone has healed.

Benefits:

Minimally Invasive: Requires smaller incisions, leading to reduced soft tissue damage and faster recovery.

Flexible Fixation: Provides stable fixation while allowing micromotion to promote bone healing.

Versatility: Suitable for a wide range of fractures and patient sizes.

Biocompatibility: Titanium material is well-tolerated by the body and reduces the risk of allergic reactions.

Common Uses:

Pediatric Orthopedics: Ideal for treating long bone fractures in children due to their growth plates and the need for flexible fixation.

Certain Adult Fractures: In specific cases where flexible intramedullary fixation is beneficial.

Rush Nail Dia. 1.5mm SS316L4186.20.0501 Length 50mm4186.20.0502 Length 60mm4186.20.0503 Length 70mm4186.20.0504 Length 80mm4186.20.0505 Length 90mm4186.20.0506 Length 100mm4186.20.0507 Length 110mm4186.20.0508 Length 120mm4186.20.0509 Length 130mm4186.20.0510 Length 140mm4186.20.0511 Length 150mm4186.20.0512 Length 160mm4186.20.0513 Length 170mm4186.20.0514 Length 180mm4186.20.0515 Length 190mm4186.20.0516 Length 200mm4186.20.0517 Length 210mm4186.20.0518 Length 220mm4186.20.0519 Length 230mm4186.20.0520 Length 240mm4186.20.0521 Length 250mm4186.20.0522 Length 300mmThe Orthopedic Rush Nail with a diameter of 1.5mm made from SS316L is designed for intramedullary fixation of fractures in long bones. This type of nail is particularly useful in pediatric orthopedics but can also be used in specific adult fractures. Here are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it suitable for medical implants.Design:
Flexible and Elastic: The nail is designed to bend and conform to the shape of the bone while providing stabilization for the fracture.Trocar Tip: A sharp tip to facilitate easier insertion into the medullary canal.Curved/Bowed Shape: Provides three-point fixation within the medullary canal, maintaining reduction and stability.Dimensions:
Diameter: 1.5mm.Length: Available in various lengths to accommodate different patient anatomies and fracture types.Surface Finish:
Polished or Smooth Surface: Minimizes friction during insertion and reduces the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until opened for use in surgery.Indications:
Fractures: Used for diaphyseal fractures of long bones such as the femur, tibia, and humerus. Suitable for pediatric and some adult patients.Minimally Invasive: Designed for use in minimally invasive surgical procedures, requiring smaller incisions compared to traditional plating methods.Components of the Rush Nail System:Rush Nails:
Multiple Sizes: Available in different diameters and lengths to match the specific requirements of the patient and the fracture type.Insertion Instruments:
Inserter: Tool used to drive the Rush nail into the medullary canal.Benders: Instruments used to shape and contour the nail to fit the specific anatomy of the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the Rush nail after the bone has healed.Benefits:Minimally Invasive: Requires smaller incisions, leading to reduced soft tissue damage and faster recovery.Flexible Fixation: Provides stable fixation while allowing micromotion to promote bone healing.Versatility: Suitable for a wide range of fractures and patient sizes.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Pediatric Orthopedics: Ideal for treating long bone fractures in children due to their growth plates and the need for flexible fixation.Certain Adult Fractures: In specific cases where flexible intramedullary fixation is beneficial.The Orthopedic Rush Nail with a diameter of 1.5mm made from SS316L is a versatile and reliable implant for fracture fixation, providing the necessary support and flexibility to facilitate proper bone healing. Its design and material properties make it a preferred choice in both pediatric and adult orthopedic surgeries.

Locking Bolt 3.4mm Self Tapping For Humerus Nail Titanium
Locking Bolt 3.9mm Self Tapping For 8mm Nail Titanium
Locking Bolt 4.9mm Self Tapping For Tibia & Femur Nail Titanium

818S.001 18mm818S.002 20mm818S.003 22mm818S.004 24mm818S.005 26mm818S.006 28mm818S.007 30mm818S.008 32mm818S.009 34mm818S.010 36mm818S.011 38mm818S.012 40mm818S.013 42mm818S.014 44mm818S.015 46mm818S.016 48mm818S.017 50mm818S.018 52mm818S.019 54mm818S.020 56mm818S.021 58mm818S.022 60mm
819S.023 62mm819S.024 64mm819S.025 66mm819S.026 68mm819S.027 70mm819S.028 72mm819S.029 74mm819S.030 76mm819S.031 78mm819S.032 80mm

Jindal Medi Surge ("JMS" Trade Mark) is a CE, ISO13485, ISO9001 and Indian FDA Certified leading Manufacturer and Exporter of Surgical and Orthopedic / Orthopaedic Instruments in Business and Industrial Healthcare range, used for Human (Adult and Pediatric) and Veterinary Surgical Procedures. 

Enders Nail Dia. 4.5mm SS316L4034.45.26 Length 260mm4034.45.27 Length 270mm4034.45.28 Length 280mm4034.45.29 Length 290mm4034.45.30 Length 300mm4034.45.31 Length 310mm4034.45.32 Length 320mm4034.45.33 Length 330mm4034.45.34 Length 340mm4034.45.35 Length 350mm4034.45.36 Length 360mm4034.45.37 Length 370mm4034.45.38 Length 380mm4034.45.39 Length 390mm4034.45.40 Length 400mm4034.45.41 Length 410mm4034.45.42 Length 420mm4034.45.43 Length 430mm4034.45.44 Length 440mm4034.45.45 Length 450mm4034.45.46 Length 460mm
The Orthopedic Enders Nail with a diameter of 4.5mm made from SS316L is a flexible intramedullary nail used for the treatment of fractures in long bones. It is especially useful in pediatric patients but can also be utilized in specific adult fractures. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it suitable for medical implants.Design:
Flexible and Elastic: Designed to bend and conform to the shape of the bone while providing stabilization for the fracture.Trocar Tip: A sharp tip to facilitate easier insertion into the medullary canal.Curved/Bowed Shape: Provides three-point fixation within the medullary canal, maintaining reduction and stability.Dimensions:
Diameter: 4.5mm.Length: Available in various lengths, typically ranging from 100mm to 500mm, to accommodate different patient anatomies and fracture types.Surface Finish:
Polished or Smooth Surface: Minimizes friction during insertion and reduces the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until opened for use in surgery.Indications:
Fractures: Used for diaphyseal fractures of long bones such as the femur, tibia, and humerus. Suitable for pediatric and some adult patients.Minimally Invasive: Designed for use in minimally invasive surgical procedures, requiring smaller incisions compared to traditional plating methods.Components of the Enders Nail System:Enders Nails:
Multiple Sizes: Available in different diameters and lengths to match the specific requirements of the patient and the fracture type.Insertion Instruments:
Inserter: Tool used to drive the Enders nail into the medullary canal.Benders: Instruments used to shape and contour the nail to fit the specific anatomy of the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the Enders nail after the bone has healed.Benefits:Minimally Invasive: Requires smaller incisions, leading to reduced soft tissue damage and faster recovery.Flexible Fixation: Provides stable fixation while allowing micromotion to promote bone healing.Versatility: Suitable for a wide range of fractures and patient sizes.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Pediatric Orthopedics: Ideal for treating long bone fractures in children due to their growth plates and the need for flexible fixation.Certain Adult Fractures: In specific cases where flexible intramedullary fixation is beneficial.The Orthopedic Enders Nail with a diameter of 4.5mm made from SS316L provides a robust solution for fracture fixation, offering the necessary support and flexibility to facilitate proper bone healing. Its design and material properties make it a reliable choice in both pediatric and adult orthopedic surgeries.

Square Nail For Ulna Dia. 4.0mm SS316L4183.40.20U Length 200mm4183.40.21U Length 210mm4183.40.22U Length 220mm4183.40.23U Length 230mm4183.40.24U Length 240mm4183.40.25U Length 250mm4183.40.26U Length 260mm4183.40.27U Length 270mm4183.40.28U Length 280mm4183.40.29U Length 290mm4183.40.30U Length 300mm

The Orthopedic Square Nail for Ulna with a diameter of 4.0mm made from SS316L is designed for the fixation of fractures in the ulna bone. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it suitable for medical implants.Design:
Square Cross-Section: Provides enhanced rotational stability and secure fixation within the medullary canal of the ulna.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 4.0mm.Length: Available in various lengths to accommodate different fracture patterns and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Ulna: Suitable for diaphyseal fractures and other types of fractures in the ulna.Components of the Square Nail System:Square Nails:
Various Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides superior rotational control compared to round nails.Minimally Invasive: Smaller incisions reduce soft tissue damage and promote faster recovery.Biocompatibility: SS316L material is well-tolerated by the body, reducing the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Ulna: Ideal for stabilizing fractures in the middle portion of the ulna.Minimally Invasive Surgery: Suitable for procedures requiring minimal disruption of surrounding tissues.The Orthopedic Square Nail for Ulna with a diameter of 4.0mm made from SS316L offers robust and stable fixation for ulna fractures, facilitating effective bone healing with its durable material and specialized design. Its design and material properties make it a reliable choice for treating ulna fractures in orthopedic surgeries.

Square Nail For Radius Dia. 3.0mm SS316L4183.30.20R Length 200mm4183.30.21R Length 210mm4183.30.22R Length 220mm4183.30.23R Length 230mm4183.30.24R Length 240mm4183.30.25R Length 250mm4183.30.26R Length 260mm4183.30.27R Length 270mm4183.30.28R Length 280mm4183.30.29R Length 290mm4183.30.30R Length 300mm
The Orthopedic Square Nail for Radius with a diameter of 3.0mm made from SS316L is specifically designed for the fixation of fractures in the radius bone. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it an ideal choice for medical implants.Design:
Square Cross-Section: Provides enhanced rotational stability and secure fixation within the medullary canal of the radius.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 3.0mm.Length: Available in various lengths to accommodate different fracture patterns and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Radius: Suitable for diaphyseal fractures and other types of fractures in the radius.Components of the Square Nail System:Square Nails:
Multiple Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides better rotational control compared to round nails.Minimally Invasive: Smaller incisions lead to reduced soft tissue damage and quicker recovery times.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Radius: Ideal for stabilizing fractures in the middle portion of the radius.Minimally Invasive Surgery: Used in procedures where minimal tissue disruption is desired.The Orthopedic Square Nail for Radius with a diameter of 3.0mm made from SS316L provides reliable and stable fixation for fractures in the radius, facilitating proper bone healing with its robust material properties and specialized design. Its design and material properties make it a preferred choice for treating radius fractures in orthopedic surgeries.

Square Nail For Ulna Dia. 3.5mm SS316L4183.35.20U Length 200mm4183.35.21U Length 210mm4183.35.22U Length 220mm4183.35.23U Length 230mm4183.35.24U Length 240mm4183.35.25U Length 250mm4183.35.26U Length 260mm4183.35.27U Length 270mm4183.35.28U Length 280mm4183.35.29U Length 290mm4183.35.30U Length 300mm
The Orthopedic Square Nail for Ulna with a diameter of 3.5mm made from SS316L is designed for the fixation of fractures in the ulna bone. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Provides high corrosion resistance, biocompatibility, and mechanical strength, making it suitable for medical implants.Design:
Square Cross-Section: Offers enhanced rotational stability and secure fixation within the medullary canal of the ulna.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 3.5mm.Length: Available in various lengths to suit different fracture types and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Ulna: Suitable for diaphyseal fractures and other types of fractures in the ulna.Components of the Square Nail System:Square Nails:
Various Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides superior rotational control compared to round nails.Minimally Invasive: Smaller incisions reduce soft tissue damage and promote faster recovery.Biocompatibility: SS316L material is well-tolerated by the body, reducing the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Ulna: Ideal for stabilizing fractures in the middle portion of the ulna.Minimally Invasive Surgery: Suitable for procedures requiring minimal disruption of surrounding tissues.The Orthopedic Square Nail for Ulna with a diameter of 3.5mm made from SS316L offers robust and stable fixation for ulna fractures, facilitating effective bone healing with its durable material and specialized design. Its design and material make it a reliable choice for orthopedic surgeries.

Square Nail For Ulna Dia. 1.5mm SS316L4183.15.17U Length 170mm4183.15.18U Length 180mm4183.15.19U Length 190mm4183.15.20U Length 200mm4183.15.21U Length 210mm4183.15.22U Length 220mm4183.15.23U Length 230mm4183.15.24U Length 240mm4183.15.25U Length 250mm4183.15.26U Length 260mm4183.15.27U Length 270mm4183.15.28U Length 280mm4183.15.29U Length 290mm4183.15.30U Length 300mm
The Orthopedic Square Nail for Ulna with a diameter of 1.5mm made from SS316L is designed specifically for the fixation of fractures in the ulna bone. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it an ideal choice for medical implants.Design:
Square Cross-Section: Provides enhanced rotational stability and secure fixation within the medullary canal of the ulna.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 1.5mm.Length: Available in various lengths to accommodate different fracture patterns and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Ulna: Suitable for diaphyseal fractures and other types of fractures in the ulna.Components of the Square Nail System:Square Nails:
Multiple Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides better rotational control compared to round nails.Minimally Invasive: Smaller incisions lead to reduced soft tissue damage and quicker recovery times.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Ulna: Ideal for stabilizing fractures in the middle portion of the ulna.Minimally Invasive Surgery: Used in procedures where minimal tissue disruption is desired.The Orthopedic Square Nail for Ulna with a diameter of 1.5mm made from SS316L provides reliable and stable fixation for fractures in the ulna, facilitating proper bone healing with its robust material properties and specialized design. Its design and material properties make it a preferred choice for treating ulna fractures in orthopedic surgeries.

Square Nail For Radius Dia. 2.5mm SS316L4183.25.17R Length 170mm4183.25.18R Length 180mm4183.25.19R Length 190mm4183.25.20R Length 200mm4183.25.21R Length 210mm4183.25.22R Length 220mm4183.25.23R Length 230mm4183.25.24R Length 240mm4183.25.25R Length 250mm4183.25.26R Length 260mm4183.25.27R Length 270mm4183.25.28R Length 280mm4183.25.29R Length 290mm4183.25.30R Length 300mm
The Orthopedic Square Nail for Radius with a diameter of 2.5mm made from SS316L is specifically designed for the fixation of fractures in the radius bone. Here are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it an ideal choice for medical implants.Design:
Square Cross-Section: Provides enhanced rotational stability and secure fixation within the medullary canal of the radius.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 2.5mm.Length: Available in various lengths to accommodate different fracture patterns and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Radius: Suitable for diaphyseal fractures and other types of fractures in the radius.Components of the Square Nail System:Square Nails:
Multiple Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides better rotational control compared to round nails.Minimally Invasive: Smaller incisions lead to reduced soft tissue damage and quicker recovery times.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Radius: Ideal for stabilizing fractures in the middle portion of the radius.Minimally Invasive Surgery: Used in procedures where minimal tissue disruption is desired.The Orthopedic Square Nail for Radius with a diameter of 2.5mm made from SS316L provides reliable and stable fixation for fractures in the radius, facilitating proper bone healing with its robust material properties and specialized design. Its design and material properties make it a preferred choice for treating radius fractures in orthopedic surgeries.

Square Nail For Radius Dia. 2.0mm SS316L4183.20.17R Length 170mm4183.20.18R Length 180mm4183.20.19R Length 190mm4183.20.20R Length 200mm4183.20.21R Length 210mm4183.20.22R Length 220mm4183.20.23R Length 230mm4183.20.24R Length 240mm4183.20.25R Length 250mm4183.20.26R Length 260mm4183.20.27R Length 270mm4183.20.28R Length 280mm4183.20.29R Length 290mm4183.20.30R Length 300mm

The Orthopedic Square Nail for Radius with a diameter of 2.0mm made from SS316L is designed for the fixation of fractures specifically in the radius bone. Here are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it an ideal choice for medical implants.Design:
Square Cross-Section: Provides enhanced rotational stability and secure fixation within the medullary canal of the radius.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 2.0mm.Length: Available in various lengths to accommodate different fracture patterns and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Radius: Suitable for diaphyseal fractures and other types of fractures in the radius.Components of the Square Nail System:Square Nails:
Multiple Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides better rotational control compared to round nails.Minimally Invasive: Smaller incisions lead to reduced soft tissue damage and quicker recovery times.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Radius: Ideal for stabilizing fractures in the middle portion of the radius.Minimally Invasive Surgery: Used in procedures where minimal tissue disruption is desired.The Orthopedic Square Nail for Radius with a diameter of 2.0mm made from SS316L provides reliable and stable fixation for fractures in the radius, facilitating proper bone healing with its robust material properties and specialized design. Its design and material properties make it a preferred choice for treating radius fractures in orthopedic surgeries.

Enders Nail Dia. 3.5mm Titanium4034.35.20T Length 200mm4034.35.21T Length 210mm4034.35.22T Length 220mm4034.35.23T Length 230mm4034.35.24T Length 240mm4034.35.25T Length 250mm4034.35.26T Length 260mm4034.35.27T Length 270mm4034.35.28T Length 280mm4034.35.29T Length 290mm4034.35.30T Length 300mm4034.35.31T Length 310mm4034.35.32T Length 320mm4034.35.33T Length 330mm4034.35.34T Length 340mm4034.35.35T Length 350mm
The Orthopedic Enders Nail with a diameter of 3.5mm made from titanium is designed for intramedullary fixation of fractures in long bones. This type of nail is particularly useful in pediatric orthopedics but can also be used in certain adult fractures. Here are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Titanium Alloy (typically Ti-6Al-4V): Known for its high strength, low weight, excellent corrosion resistance, and biocompatibility, making it suitable for medical implants.Design:
Flexible and Elastic: The nail is designed to be flexible, allowing it to bend and conform to the shape of the bone while still providing stabilization for the fracture.Trocar Tip: The nail typically has a trocar (sharp) tip to facilitate easier insertion into the medullary canal.Curved/Bowed Shape: Provides three-point fixation within the medullary canal, maintaining reduction and stability.Dimensions:
Diameter: 3.5mm.Length: Available in multiple lengths ranging from 100mm to 500mm to accommodate different patient anatomies and fracture types.Surface Finish:
Polished or Smooth Surface: To minimize friction during insertion and reduce the risk of soft tissue irritation.Sterility:
Sterile Packaging: The nails are pre-sterilized and packaged to ensure sterility until they are used in surgery.Indications:
Fractures: Primarily used for diaphyseal fractures of long bones such as the femur, tibia, and humerus. Suitable for pediatric and some adult patients.Minimally Invasive: Designed for use in minimally invasive surgical procedures, requiring smaller incisions compared to traditional plating methods.Components of the Enders Nail System:Enders Nails:
Multiple Sizes: Available in different diameters and lengths to match the specific requirements of the patient and the fracture type.Insertion Instruments:
Inserter: A tool used to drive the Enders nail into the medullary canal.Benders: Instruments used to shape and contour the nail to fit the specific anatomy of the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: A device used to remove the Enders nail after the bone has healed.Benefits:Minimally Invasive: Requires smaller incisions, leading to reduced soft tissue damage and faster recovery.Flexible Fixation: Provides stable fixation while allowing micromotion to promote bone healing.Versatility: Suitable for a wide range of fractures and patient sizes.Biocompatibility: Titanium material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Pediatric Orthopedics: Ideal for treating long bone fractures in children due to their growth plates and the need for flexible fixation.Certain Adult Fractures: In specific cases where flexible intramedullary fixation is beneficial.The Orthopedic Enders Nail with a diameter of 3.5mm made from titanium is a versatile and reliable implant for fracture fixation, providing the necessary support and flexibility to facilitate proper bone healing. Its design and material properties make it a preferred choice in both pediatric and adult orthopedic surgeries.

Enders Nail Dia. 4.0mm Titanium4034.40.24T Length 240mm4034.40.25T Length 250mm4034.40.26T Length 260mm4034.40.27T Length 270mm4034.40.28T Length 280mm4034.40.29T Length 290mm4034.40.30T Length 300mm4034.40.31T Length 310mm4034.40.32T Length 320mm4034.40.33T Length 330mm4034.40.34T Length 340mm4034.40.35T Length 350mm4034.40.36T Length 360mm4034.40.37T Length 370mm4034.40.38T Length 380mm4034.40.39T Length 390mm4034.40.40T Length 400mmThe Orthopedic Enders Nail with a diameter of 4.0mm made from titanium is designed for intramedullary fixation of fractures in long bones. This nail is particularly useful in pediatric orthopedics but can also be used in specific adult fractures. Here are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Titanium Alloy (typically Ti-6Al-4V): Known for its high strength, low weight, excellent corrosion resistance, and biocompatibility, making it suitable for medical implants.Design:
Flexible and Elastic: Designed to bend and conform to the shape of the bone while providing stabilization for the fracture.Trocar Tip: Sharp tip to facilitate easier insertion into the medullary canal.Curved/Bowed Shape: Provides three-point fixation within the medullary canal, maintaining reduction and stability.Dimensions:
Diameter: 4.0mm.Length: Available in various lengths, typically ranging from 100mm to 500mm, to accommodate different patient anatomies and fracture types.Surface Finish:
Polished or Smooth Surface: Minimizes friction during insertion and reduces the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until opened for use in surgery.Indications:
Fractures: Used for diaphyseal fractures of long bones such as the femur, tibia, and humerus. Suitable for pediatric and some adult patients.Minimally Invasive: Designed for use in minimally invasive surgical procedures, requiring smaller incisions compared to traditional plating methods.Components of the Enders Nail System:Enders Nails:
Multiple Sizes: Available in different diameters and lengths to match the specific requirements of the patient and the fracture type.Insertion Instruments:
Inserter: Tool used to drive the Enders nail into the medullary canal.Benders: Instruments used to shape and contour the nail to fit the specific anatomy of the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the Enders nail after the bone has healed.Benefits:Minimally Invasive: Requires smaller incisions, leading to reduced soft tissue damage and faster recovery.Flexible Fixation: Provides stable fixation while allowing micromotion to promote bone healing.Versatility: Suitable for a wide range of fractures and patient sizes.Biocompatibility: Titanium material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Pediatric Orthopedics: Ideal for treating long bone fractures in children due to their growth plates and the need for flexible fixation.Certain Adult Fractures: In specific cases where flexible intramedullary fixation is beneficial.The Orthopedic Enders Nail with a diameter of 4.0mm made from titanium is a versatile and reliable implant for fracture fixation, offering the necessary support and flexibility to facilitate proper bone healing. Its design and material properties make it a preferred choice in both pediatric and adult orthopedic surgeries.

Square Nail For Radius Dia. 3.5mm SS316L4183.35.20R Length 200mm4183.35.21R Length 210mm4183.35.22R Length 220mm4183.35.23R Length 230mm4183.35.24R Length 240mm4183.35.25R Length 250mm4183.35.26R Length 260mm4183.35.27R Length 270mm4183.35.28R Length 280mm4183.35.29R Length 290mm4183.35.30R Length 300mm

The Orthopedic Square Nail for Radius with a diameter of 3.5mm made from SS316L is designed for the fixation of fractures specifically in the radius bone. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it an ideal choice for medical implants.Design:
Square Cross-Section: Provides enhanced rotational stability and secure fixation within the medullary canal of the radius.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 3.5mm.Length: Available in various lengths to accommodate different fracture patterns and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Radius: Suitable for diaphyseal fractures and other types of fractures in the radius.Components of the Square Nail System:Square Nails:
Multiple Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides better rotational control compared to round nails.Minimally Invasive: Smaller incisions lead to reduced soft tissue damage and quicker recovery times.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Radius: Ideal for stabilizing fractures in the middle portion of the radius.Minimally Invasive Surgery: Used in procedures where minimal tissue disruption is desired.The Orthopedic Square Nail for Radius with a diameter of 3.5mm made from SS316L provides reliable and stable fixation for fractures in the radius, facilitating proper bone healing with its robust material properties and specialized design. Its design and material properties make it a preferred choice for treating radius fractures in orthopedic surgeries.

Humerus nails made from titanium are used for the internal fixation of fractures in the humerus. Here are the detailed specifications:
Material: Titanium alloy (commonly Ti-6Al-4V)Length: Typically ranges from 180mm to 300mm, available in various sizes to accommodate different patient anatomiesDiameter: Common diameters include 7mm, 8mm, and 9mmDesign:Proximal End: Often features multiple locking holes for additional stabilizationDistal End: May include options for static and dynamic locking to prevent rotational and axial movementCorrosion Resistance: Excellent corrosion resistance due to the titanium alloy materialBiomechanics: Designed to match the natural curvature of the humerus for better fit and load distributionWeight: Lighter than stainless steel alternatives, reducing patient discomfortBiocompatibility: High biocompatibility, reducing the risk of allergic reactions and promoting better integration with boneSterility: Typically supplied sterile, or can be sterilized before useApplication: Used for treating fractures of the humerus, including proximal, shaft, and distal fractures

Square Nail For Ulna Dia. 3.0mm SS316L4183.30.20U Length 200mm4183.30.21U Length 210mm4183.30.22U Length 220mm4183.30.23U Length 230mm4183.30.24U Length 240mm4183.30.25U Length 250mm4183.30.26U Length 260mm4183.30.27U Length 270mm4183.30.28U Length 280mm4183.30.29U Length 290mm4183.30.30U Length 300mm

The Orthopedic Square Nail for Ulna with a diameter of 3.0mm made from SS316L is specifically designed for the fixation of fractures in the ulna bone. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it an ideal choice for medical implants.Design:
Square Cross-Section: Provides enhanced rotational stability and secure fixation within the medullary canal of the ulna.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 3.0mm.Length: Available in various lengths to accommodate different fracture patterns and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Ulna: Suitable for diaphyseal fractures and other types of fractures in the ulna.Components of the Square Nail System:Square Nails:
Multiple Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides better rotational control compared to round nails.Minimally Invasive: Smaller incisions lead to reduced soft tissue damage and quicker recovery times.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Ulna: Ideal for stabilizing fractures in the middle portion of the ulna.Minimally Invasive Surgery: Used in procedures where minimal tissue disruption is desired.The Orthopedic Square Nail for Ulna with a diameter of 3.0mm made from SS316L provides reliable and stable fixation for fractures in the ulna, facilitating proper bone healing with its robust material properties and specialized design. Its design and material properties make it a preferred choice for treating ulna fractures in orthopedic surgeries.

Square Nail For Ulna Dia. 2.0mm SS316L4183.20.17U Length 170mm4183.20.18U Length 180mm4183.20.19U Length 190mm4183.20.20U Length 200mm4183.20.21U Length 210mm4183.20.22U Length 220mm4183.20.23U Length 230mm4183.20.24U Length 240mm4183.20.25U Length 250mm4183.20.26U Length 260mm4183.20.27U Length 270mm4183.20.28U Length 280mm4183.20.29U Length 290mm4183.20.30U Length 300mm

The Orthopedic Square Nail for Ulna with a diameter of 2.0mm made from SS316L is designed specifically for the fixation of fractures in the ulna bone. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it an ideal choice for medical implants.Design:
Square Cross-Section: Provides enhanced rotational stability and secure fixation within the medullary canal of the ulna.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 2.0mm.Length: Available in various lengths to accommodate different fracture patterns and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Ulna: Suitable for diaphyseal fractures and other types of fractures in the ulna.Components of the Square Nail System:Square Nails:
Multiple Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides better rotational control compared to round nails.Minimally Invasive: Smaller incisions lead to reduced soft tissue damage and quicker recovery times.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Ulna: Ideal for stabilizing fractures in the middle portion of the ulna.Minimally Invasive Surgery: Used in procedures where minimal tissue disruption is desired.The Orthopedic Square Nail for Ulna with a diameter of 2.0mm made from SS316L provides reliable and stable fixation for fractures in the ulna, facilitating proper bone healing with its robust material properties and specialized design. Its design and material properties make it a preferred choice for treating ulna fractures in orthopedic surgeries.

Square Nail For Ulna Dia. 2.5mm SS316L4183.25.17U Length 170mm4183.25.18U Length 180mm4183.25.19U Length 190mm4183.25.20U Length 200mm4183.25.21U Length 210mm4183.25.22U Length 220mm4183.25.23U Length 230mm4183.25.24U Length 240mm4183.25.25U Length 250mm4183.25.26U Length 260mm4183.25.27U Length 270mm4183.25.28U Length 280mm4183.25.29U Length 290mm4183.25.30U Length 300mm
The Orthopedic Square Nail for Ulna with a diameter of 2.5mm made from SS316L is designed specifically for the fixation of fractures in the ulna bone. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it an ideal choice for medical implants.Design:
Square Cross-Section: Provides enhanced rotational stability and secure fixation within the medullary canal of the ulna.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 2.5mm.Length: Available in various lengths to accommodate different fracture patterns and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Ulna: Suitable for diaphyseal fractures and other types of fractures in the ulna.Components of the Square Nail System:Square Nails:
Multiple Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides better rotational control compared to round nails.Minimally Invasive: Smaller incisions lead to reduced soft tissue damage and quicker recovery times.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Ulna: Ideal for stabilizing fractures in the middle portion of the ulna.Minimally Invasive Surgery: Used in procedures where minimal tissue disruption is desired.The Orthopedic Square Nail for Ulna with a diameter of 2.5mm made from SS316L provides reliable and stable fixation for fractures in the ulna, facilitating proper bone healing with its robust material properties and specialized design. Its design and material properties make it a preferred choice for treating ulna fractures in orthopedic surgeries.

Enders Nail Dia. 4.5mm Titanium4034.45.26T Length 260mm4034.45.27T Length 270mm4034.45.28T Length 280mm4034.45.29T Length 290mm4034.45.30T Length 300mm4034.45.31T Length 310mm4034.45.32T Length 320mm4034.45.33T Length 330mm4034.45.34T Length 340mm4034.45.35T Length 350mm4034.45.36T Length 360mm4034.45.37T Length 370mm4034.45.38T Length 380mm4034.45.39T Length 390mm4034.45.40T Length 400mm4034.45.41T Length 410mm4034.45.42T Length 420mm4034.45.43T Length 430mm4034.45.44T Length 440mm4034.45.45T Length 450mm4034.45.46T Length 460mm
The Orthopedic Enders Nail with a diameter of 4.5mm made from titanium is designed for intramedullary fixation of fractures in long bones. This nail is particularly useful in pediatric orthopedics but can also be used in specific adult fractures. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Titanium Alloy (typically Ti-6Al-4V): Known for its high strength, low weight, excellent corrosion resistance, and biocompatibility, making it suitable for medical implants.Design:
Flexible and Elastic: Designed to bend and conform to the shape of the bone while providing stabilization for the fracture.Trocar Tip: Sharp tip to facilitate easier insertion into the medullary canal.Curved/Bowed Shape: Provides three-point fixation within the medullary canal, maintaining reduction and stability.Dimensions:
Diameter: 4.5mm.Length: Available in various lengths, typically ranging from 100mm to 500mm, to accommodate different patient anatomies and fracture types.Surface Finish:
Polished or Smooth Surface: Minimizes friction during insertion and reduces the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until opened for use in surgery.Indications:
Fractures: Used for diaphyseal fractures of long bones such as the femur, tibia, and humerus. Suitable for pediatric and some adult patients.Minimally Invasive: Designed for use in minimally invasive surgical procedures, requiring smaller incisions compared to traditional plating methods.Components of the Enders Nail System:Enders Nails:
Multiple Sizes: Available in different diameters and lengths to match the specific requirements of the patient and the fracture type.Insertion Instruments:
Inserter: Tool used to drive the Enders nail into the medullary canal.Benders: Instruments used to shape and contour the nail to fit the specific anatomy of the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the Enders nail after the bone has healed.Benefits:Minimally Invasive: Requires smaller incisions, leading to reduced soft tissue damage and faster recovery.Flexible Fixation: Provides stable fixation while allowing micromotion to promote bone healing.Versatility: Suitable for a wide range of fractures and patient sizes.Biocompatibility: Titanium material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Pediatric Orthopedics: Ideal for treating long bone fractures in children due to their growth plates and the need for flexible fixation.Certain Adult Fractures: In specific cases where flexible intramedullary fixation is beneficial.The Orthopedic Enders Nail with a diameter of 4.5mm made from titanium is a versatile and reliable implant for fracture fixation, offering the necessary support and flexibility to facilitate proper bone healing. Its design and material properties make it a preferred choice in both pediatric and adult orthopedic surgeries.

Square Nail For Radius Dia. 1.5mm SS316L4183.15.17R Length 170mm4183.15.18R Length 180mm4183.15.19R Length 190mm4183.15.20R Length 200mm4183.15.21R Length 210mm4183.15.22R Length 220mm4183.15.23R Length 230mm4183.15.24R Length 240mm4183.15.25R Length 250mm4183.15.26R Length 260mm4183.15.27R Length 270mm4183.15.28R Length 280mm4183.15.29R Length 290mm4183.15.30R Length 300mm
The Orthopedic Square Nail for Radius with a diameter of 1.5mm made from SS316L is designed for the fixation of fractures specifically in the radius bone. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it an ideal choice for medical implants.Design:
Square Cross-Section: Provides enhanced rotational stability and secure fixation within the medullary canal of the radius.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 1.5mm.Length: Available in various lengths to accommodate different fracture patterns and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Radius: Suitable for diaphyseal fractures and other types of fractures in the radius.Components of the Square Nail System:Square Nails:
Multiple Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides better rotational control compared to round nails.Minimally Invasive: Smaller incisions lead to reduced soft tissue damage and quicker recovery times.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Radius: Ideal for stabilizing fractures in the middle portion of the radius.Minimally Invasive Surgery: Used in procedures where minimal tissue disruption is desired.The Orthopedic Square Nail for Radius with a diameter of 1.5mm made from SS316L provides reliable and stable fixation for fractures in the radius, facilitating proper bone healing with its robust material properties and specialized design. Its design and material properties make it a preferred choice for treating radius fractures in orthopedic surgeries.

Square Nail For Radius Dia. 4.0mm SS316L4183.40.20R Length 200mm4183.40.21R Length 210mm4183.40.22R Length 220mm4183.40.23R Length 230mm4183.40.24R Length 240mm4183.40.25R Length 250mm4183.40.26R Length 260mm4183.40.27R Length 270mm4183.40.28R Length 280mm4183.40.29R Length 290mm4183.40.30R Length 300mm
The Orthopedic Square Nail for Radius with a diameter of 4.0mm made from SS316L is specifically designed for the fixation of fractures in the radius bone. Below are the detailed specifications and characteristics:
Specifications and Characteristics:Material:
Stainless Steel SS316L: Known for its high corrosion resistance, biocompatibility, and mechanical strength, making it an ideal choice for medical implants.Design:
Square Cross-Section: Provides enhanced rotational stability and secure fixation within the medullary canal of the radius.Trocar Tip: A sharp tip that facilitates easier insertion into the bone.Dimensions:
Diameter: 4.0mm.Length: Available in various lengths to accommodate different fracture patterns and patient anatomies.Surface Finish:
Polished or Smooth Surface: Reduces friction during insertion and minimizes the risk of soft tissue irritation.Sterility:
Sterile Packaging: Pre-sterilized and packaged to ensure sterility until used in surgery.Indications:
Fractures of the Radius: Suitable for diaphyseal fractures and other types of fractures in the radius.Components of the Square Nail System:Square Nails:
Multiple Sizes: Available in different diameters and lengths to fit various patient needs and fracture types.Insertion Instruments:
Inserter: A tool used to drive the square nail into the medullary canal.End Caps (if applicable):
Optional: Used to prevent migration of the nail and to protect the nail tip.Extraction Instruments:
Extractor: Device used to remove the square nail after the bone has healed.Benefits:Rotational Stability: Square cross-section provides better rotational control compared to round nails.Minimally Invasive: Smaller incisions lead to reduced soft tissue damage and quicker recovery times.Biocompatibility: SS316L material is well-tolerated by the body and reduces the risk of allergic reactions.Common Uses:Diaphyseal Fractures of the Radius: Ideal for stabilizing fractures in the middle portion of the radius.Minimally Invasive Surgery: Used in procedures where minimal tissue disruption is desired.The Orthopedic Square Nail for Radius with a diameter of 4.0mm made from SS316L provides reliable and stable fixation for fractures in the radius, facilitating proper bone healing with its robust material properties and specialized design. Its design and material properties make it a preferred choice for treating radius fractures in orthopedic surgeries.