Orthopedic S.S. Locking Bone Plate Implants

The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.Locking Medial High Tibia Osteotomy Plate 4.5/5.0mm (TOMOFIX)S.S.Titanium

• Item Code: 575.000
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Calcaneal Plate 3.5mm Orthopedic Locking Implant The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.
60mm Left60mm Right70mm Left70mm Right

• Item Code: 581S.000L
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Extra Articular Distal Humerus Plate 3.5 - 4.0mm Orthopedic Locking Implant Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.
Locking Extra -Articular Distal Humerus Plate 3.5mm (Left)-S.S.3 Holes6 Holes8 Holes10 Holes12 Holes

• Item Code: 546.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

• Periarticular Proximal Tibia Locking Plate manufacturer
• Anatomically contoured plates create a fit that requires little or no additional bending and are helpful for metaphyseal/diaphyseal reduction
• The anatomical shape of the head of the plate matches the shape of the proximal tibia
• Locking holes in the plate head allow placement of the screws to capture medial fragments
• The low profile plate facilitates fixation without impinging on soft tissues
• Thick-to-thin profiles make the plates autocontourable
• The tapered plate shaft design allows for a minimally invasive technique with submuscular passage of the plate
• The plate can be used to support a medial wedge or fragment
• 3.5mm Proximal Lateral Tibial Locking Plates are available in six lengths, from 6 holes (104mm) to 16 holes (224mm)
• 5.5mm Proximal Lateral Tibial Locking Plates are available in six lengths, from 6 holes (97mm) to 14 holes (250mm)

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Delhi, India
• Production Capacity: Any
• Delivery Time: As Per Order Quantity
• Packaging Details: As per CE, ISO, FDA standards

The Pediatric LCP Plate System is indicated for fixation of fractures (including pathologic and impending pathologic fractures) and osteotomies of the femur in infants, children, adolescents and small statured adults.

Specific indications for the 100°, 110°, 120°, 130°, 140°, 150° plates include:

• Varus, valgus, rotational and /or shortening osteotomies
• Femoral neck and/or pertrochanteric fractures
• Proximal metaphyseal fractures
• Diaphyseal fractures
• Pathologic fractures
• Prophylactic use for impending pathologic fractures

Specific indications for the 90° plates include:

• Varus, valgus, rotational and /or shortening osteotomies
• Femoral neck and/or pertrochanteric fractures
• Proximal and distal metaphyseal fractures
• Diaphyseal fractures
• Pathologic fractures
• Prophylactic use for impending pathologic fractures

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Delhi, India
• Production Capacity: Any
• Delivery Time: As Per Order Quantity
• Packaging Details: As per CE, ISO, FDA standards

Locking Distal Humerus Plate Lateral Side with Support 2.7 - 3.5mm Orthopedic Locking Implant Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.Locking Distal Humerus Plate (Dhlp) Lateral Side With Support 2.7/3.5mm (Left)- S.S.3 Holes5 Holes7 Holes9 Holes

• Item Code: 582.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking T-Plate 4.5 - 5.0mm Orthopedic Locking Implant The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.

4.5/5.0 mm Locking T - Plate - S.S.3 Holes4 Holes5 Holes6 Holes7 Holes8 Holes9 Holes

• Item Code: 547.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Distal Tibia Plate Medial The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.

• Item Code: 593.004
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Posterior Medial Tibia Plate The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.

• Item Code: 587.002
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Distal Humerus Plate Medial Side 2.7 - 3.5 Orthopedic Locking Implant Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.

Locking Distal Humerus Plate (Dhlp) Medial Side 2.7/3.5mm (Left)- S.S.3 Holes4 Holes5 Holes6 Holes7 Holes8 Holes9 Holes10 Holes

• Item Code: 574.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Anterolateral Distal Tibia Plate 3.5 - 4.0mm Orthopedic Locking Implant The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.Locking Anterolateral Distal Tibia Plate 3.5mm (Left) - S.S.2 Holes4 Holes5 Holes6 Holes7 Holes8 Holes9 Holes10 Holes11 Holes13 Holes

• Item Code: 567.005
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking L - Buttress Plate 4.5 - 5.0mm Orthopedic Locking Implant The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.4.5/5.0mm Locking L - Buttress Plate, Right Leg - S.S.3 Holes4 Holes5 Holes6 Holes7 Holes8 Holes

• Item Code: 551.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Dorsal Distal Radius L-Plate Haed 3 Holes 2.7mm Orthopedic Locking Implant Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.

• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Proximal Medial Tibia Plate 3.5 - 4.0mm Orthopedic Locking Implant The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.

Locking Proximal Medial Tibia Plate 3.5mm (Right) - S.S.4 Holes5 Holes6 Holes7 Holes8 Holes9 Holes10 Holes11 Holes12 Holes14 Holes

• Item Code: 583.004
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Low Bend Medial Distal Tibia Plate 3.5-4.0mm Orthopedic Locking Implant The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.Locking Low Bend Medial Distal Tibia Plate 3.5mm (Left) - S.S.4 Holes6 Holes8 Holes10 Holes12 Holes14 HolesLocking Low Bend Medial Distal Tibia Plate 3.5mm (Left) - Titanium4 Holes6 Holes8 Holes10 Holes12 Holes14 Holes

• Item Code: 577.004
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Jindal Medi Surge are manufacturer''s of the widest range of Narrow Locking Compression Plate 4.5/5.0mm which are fracture fixation devices with threaded screw holes, which allow screws to thread to the plate and function as a fixed-angle device. These plates may have a mixture of holes that allow placement of both locking and traditional non locking screws (so-called com-bi plates). The clinical care impetus for development of these plates has been a combination of factors, including the increasing survival of patients with high-energy injuries, aging populations with an increasing rate of fragility fractures, and dissatisfaction of patients and surgeons with the outcomes of treatment of specific particularize fractures. All plates are available is Stainless Steel Titanium Alloy.

• Pay Mode Terms: T/T (Bank Transfer),PAYPAL
• Port of Dispatch: Delhi, India
• Production Capacity: Any
• Delivery Time: As Per Order Quantity
• Packaging Details: As per CE/ISO standards

Locking Distal Ulna Plate Orthopedic Locking Implant Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.

• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Periarticular Proximal Humerus Plate 3.5-4.0mm Orthopedic Locking Implant Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.
Locking Periarticular Proximal Humerus Plate 3.5mm (Left) - S.S.3 Holes5 Holes7 Holes9 HolesLocking Periarticular Proximal Humerus Plate 3.5mm (Left) - Titanium3 Holes5 Holes7 Holes9 HolesLocking Periarticular Proximal Humerus Plate 3.5mm (Right) - S.S.3 Holes5 Holes7 Holes9 HolesLocking Periarticular Proximal Humerus Plate 3.5mm (Right) - Titanium3 Holes5 Holes7 Holes9 Holes

• Item Code: 586.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Lateral Tibia Locking Plate The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.

• Item Code: 559.005
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

The Locking Distal Lateral Fibula Plate 2.7/3.5mm are indicated for fractures, osteotomies, and nonunions of the metaphyseal and diaphyseal region of the distal fibula, especially in osteopenic bone.The plates are available in stainless steel and titanium and are anatomically pre-contoured for the lateral and posterolateral aspect of the distal fibula.

• Coaxial distal holes accept 2.4 mm and 2.7 mm locking and cortex screws to provide multiple screw options
• Coaxial Holes in plate head have recess to minimize screw prominence to create a low-profile construct
• Four K-wire holes in the head of the lateral plate accept 2.0 mm K-wires
• Combi holes in shaft accept 3.5 mm locking screws, 3.5 mm cortex screws, and 4.0 mm cancellous bone screws
• Choice of lateral or posterolateral plates

• 	Locking Distal Lateral Fibula Plate 2.7/3.5mm (Left) - S.S.
  589.003	3 Holes
  589.004	4 Holes
  589.005	5 Holes
  589.006	6 Holes
  589.007	7 Holes
  589.008	8 Holes
  589.009	9 Holes
  	Locking Distal Lateral Fibula Plate 2.7/3.5mm (Left) - Titanium
  589T.003	3 Holes
  589T.004	4 Holes
  589T.005	5 Holes
  589T.006	6 Holes
  589T.007	7 Holes
  589T.008	8 Holes
  589T.009	9 Holes
  589T.0011	11 Holes
  589T.0013	13 Holes
  	Locking Distal Lateral Fibula Plate 2.7/3.5mm (Right) - S.S.
  591.003	3 Holes
  591.004	4 Holes
  591.005	5 Holes
  591.006	6 Holes
  591.007	7 Holes
  591.008	8 Holes
  591.009	9 Holes
  	Locking Distal Lateral Fibula Plate 2.7/3.5mm (Right) - Titanium
  591T.003	3 Holes
  591T.004	4 Holes
  591T.005	5 Holes
  591T.006	6 Holes
  591T.007	7 Holes
  591T.008	8 Holes
  591T.009	9 Holes
  591T.0011	11 Holes
  591T.0013	13 Holes

• Pay Mode Terms: T/T (Bank Transfer),ONLINE
• Port of Dispatch: Delhi, India
• Packaging Details: As per CE, ISO, FDA standards

Jindal Medi Surge are manufacturer''s of the widest range of Locking Plates. We are always trying to innovate & develop our range of products. These are fracture fixation devices with threaded screw holes, which allow screws to thread to the plate and function as a fixed-angle device. These plates may have a mixture of holes that allow placement of both locking and traditional non locking screws (so-called com-bi plates). The clinical care impetus for development of these plates has been a combination of factors, including the increasing survival of patients with high-energy injuries, aging populations with an increasing rate of fragility fractures, and dissatisfaction of patients and surgeons with the outcomes of treatment of specific particularize fractures. All plates are available is Stainless Steel & Titanium Alloy.

• Pay Mode Terms: T/T (Bank Transfer),PAYPAL
• Port of Dispatch: New Delhi INDIA
• Packaging Details: AS PER CE, ISO STANDARDS

Locking Pilon Plate The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.

• Item Code: 539.007
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Reconstruction Plate 3.5mm Straight Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.

• Item Code: 532.005
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure.

• Delivery Time: As Per Order Quantity

We at Jindal Medi Surge use research to create Orthopedic and Trauma Instruments in a wide range. Affordable generic orthopedic instruments are used in surgical fixation, correction and regeneration of human skeleton and its soft tissues. Over the years we have won the trust of healthcare professionals and patients across the world. A wide range of our products ensures that people get almost everything required under one roof. We provide Instruments made from medical grade Stainless Steel.

• Delivery Time: As Per Order Quantity

Locking T-Buttress Plate 4.5 - 5.0mm Orthopedic Locking Implant  The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.

• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking DHS 135 Deg. Long Barral Orthopedic Locking Implant The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.Locking - Dhs- 135 Deg. Long Barrel - S.S.3 Holes4 Holes5 Holes6 Holes7 Holes8 Holes9 Holes10 Holes12 Holes14 Holes16 Holes18 Holes20 Holes

• Item Code: 565.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Jindal Medi Surge are manufacturer''s of 4.5/5.0 Broad Locking Compression Plate which are fracture fixation devices with threaded screw holes, which allow screws to thread to the plate and function as a fixed-angle device. These plates may have a mixture of holes that allow placement of both locking and traditional non locking screws (so-called com-bi plates). The clinical care impetus for development of these plates has been a combination of factors, including the increasing survival of patients with high-energy injuries, aging populations with an increasing rate of fragility fractures, and dissatisfaction of patients and surgeons with the outcomes of treatment of specific particularize fractures. All plates are available is Stainless Steel & Titanium Alloy.

• Item Code: 543.006
• Pay Mode Terms: T/T (Bank Transfer),ONLINE
• Port of Dispatch: DELHI, INDIA
• Delivery Time: As Per Order Quantity
• Packaging Details: AS PER CE, ISO, FDA STANDARDS

Locking Extra Articular Small T-Plate Oblique Angle 2.7mm (Head 5 Holes) Orthopedic Locking Implant Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.

Locking Extra -Articular Small T- Plate Oblique Angled 2.7mm (Left) Head 5 Holes - S.S.3 Holes4 Holes5 Holes6 Holes8 Holes10 Holes

• Item Code: 558.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Extra Articular Small T-Plate Right Angled 2.7mm (Head 5 Holes) Orthopedic Locking Implant Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.Locking Extra -Articular Small T- Plate Right Angled 2.7mm (Left)-S.S.3 Holes4 Holes5 Holes6 Holes8 Holes10 Holes

• Item Code: 554.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Dorsal Distal Radius L-Plate Head 3 Holes Angle 20 Deg. 2.7mm Orthopedic Locking Implant Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.

• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Dorsal Distal Radius L-Plate Head 2 Holes 2.7mm Orthopedic Locking Implant  Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.

• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

The Locking Clavicle Hook Plate 3.5mm provides fixation for lateral clavicle fractures and for acromioclavicular joint injuries.Fixation of lateral clavicle fractures and dislocations of the acromioclavicular joint.

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Delhi, India
• Delivery Time: As Per Order Quantity
• Packaging Details: As per CE, ISO, FDA standards

Locking T Plate Right Angled Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.

• Item Code: 534.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Small Locking Compression Plate 3.5mm Jindal Medi Surge are manufacturer's of the widest range of Locking Compression Plates which are fracture fixation devices with threaded screw holes, which allow screws to thread to the plate and function as a fixed-angle device. These plates may have a mixture of holes that allow placement of both locking and traditional non locking screws (so-called com-bi plates). The clinical care impetus for development of these plates has been a combination of factors, including the increasing survival of patients with high-energy injuries, aging populations with an increasing rate of fragility fractures, and dissatisfaction of patients and surgeons with the outcomes of treatment of specific particularize fractures. All plates are available is Stainless Steel Titanium Alloy.

• Pay Mode Terms: T/T (Bank Transfer),ONLINE
• Port of Dispatch: Delhi, India
• Packaging Details: As per CE/ISO/FDA standards

Locking Condylar Buttress Plate 4.5mm Orthopedic Locking Implant The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.  
Locking Condylar Buttress Plate - For Left Leg - S.S.5 Holes7 Holes9 Holes11 Holes13 Holes

• Item Code: 501.105
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard