Orthopedic Titanium Locking Bone Plate Implants

Distal Radius Locking Plate Manufacturer

1. Multiple distal locking options
   • Distal multi-hole design for fragment fixation of radial styloid and lunate facet as well as distal radioulnar joint.
2. Three distal sizes to fit individual anatomy
   • Small: 20.0mm, Large: 22.0mm, Wide 25.5mm
3. Individual fine contouring
   • Independent fine contouring of the radial and intermediate columns due to the two struts of the plate.
   • Wide window allows inspection of fracture lines.
4. Low profile, anatomically pre-contoured
   • Anatomically contoured curve with excellent fit to distal radius.
5. Temporary fixation
   • Kirschner wire holes for temporary fixation of the plate.
6. Elongated hole for plate positioning
   • Elongated hole for better plate positioning and radius length adjustment.
7. Twin Holes, locking or compression fixation
   • Locking or compression fixation provides more clinical choices.

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Delhi, India
• Production Capacity: Any
• Delivery Time: As Per Order Quantity
• Packaging Details: As per CE, ISO, FDA standards

Jindal Medi Surge are manufacturer's of the widest range of PHMA Locking Plate 3.5mm (Proximal Humeral Multi Angle) pertaining to Humerus Bone Fractures which are fracture fixation devices with threaded screw holes, which allow screws to thread to the plate and function as a fixed-angle device. These plates may have a mixture of holes that allow placement of both locking and traditional non locking screws (so-called com-bi plates). The clinical care impetus for development of these plates has been a combination of factors, including the increasing survival of patients with high-energy injuries, aging populations with an increasing rate of fragility fractures, and dissatisfaction of patients and surgeons with the outcomes of treatment of specific particularize fractures. All plates are available is Stainless Steel Titanium Alloy.

• Pay Mode Terms: T/T (Bank Transfer),PAYPAL
• Port of Dispatch: Delhi, India
• Production Capacity: Any
• Delivery Time: As Per Order Quantity
• Packaging Details: As per CE/ISO standards

Locking Clavicle Medial "S" Plate (left right) indicated in fracture of shaft of clavicle. It is an anatomical pre contoured plate for left and right side. It is available in stainless steel and titanium. It is available in 2 holes to 16 holes(2 holes increment).

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Delhi, India
• Production Capacity: Any
• Delivery Time: As Per Order Quantity
• Packaging Details: As per CE, ISO, FDA standards

Locking Proximal Femur Plate The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.

• Item Code: 535.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Distal Femur Plate Orthopedic Locking Implant The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.

• Item Code: 555.005
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Proximal Tibia Raft Plate 3.5mm - 4.0mm Orthopedic Locking Implant The goal of any surgical fracture treatment is to reconstruct the anatomy and restore its function. Internal fixation is distinguished by anatomic reduction, preservation of blood supply, stable fixation and early, functional mobilization. Plate and screw osteosynthesis has been established as clinically advantageous for quite some time. Clinical results have improved by using internal fixation with angular stability (internal fixators) in osteopenic bone and in complicated fractures. Jindal Medi Surge is one of the top-rated large fragment implants and instruments manufacturers in India. The Large Fragment Locking Compression Plate System is part of a Titanium and Stainless-Steel Plate and Screw System that merges locking screw technology with conventional plating techniques. The LCP System has many resemblances to conventional plate fixation methods, but with a few important advancements. Locking screws provide the ability to create a fixed angle construct while utilizing familiar plating techniques. A fixed angle construct provides improved fixation in multi fragment fractures or osteopenic bone where traditional screw purchase is compromised. LCP Plate constructs do not depend on plate-to-bone compression to maintain stability, but function similarly to multiple small multi angled blade plates. Locking Compression Plate Allows fracture treatment using conventional plating with conventional cancellous or cortex bone screws, Allows fracture treatment using locked plating with uni cortical or bicortical locking screws, Permits the combination of locking and conventional screw techniques. The screw design has been modified, from a standard 4.5 mm cortex screw design, to increase fixation and facilitate the surgical procedure. The conical head enables alignment of the locking screw in the threaded plate hole to provide a fixed angle connection between the plate and the screw. The large core diameter improves shear strength and bending of the screw and distributes the load over a larger area in the bone. The shallow head profile of the locking screws results from the larger core diameter and is acceptable because locking screws don’t depend only on screw purchase in the bone to maintain stability. Bicortical screw fixation has long been the traditional method of compressing a plate to the bone where a friction between the bone and the plate maintains stability. Load transfer and screw stability are accomplished at two points along the screw: the near and far cortices. Unicortical locking screws provide load transfer and stability only at the near cortex due to the threaded connection between the screw and the plate. Load transfer and screw stability are accomplished at two points along the screw: the screw head and the near cortex. Because the screw is locked to the plate, fixation doesn’t depend on the pullout strength of the screw or on maintaining friction between the plate and the bone. Anatomic Reduction: – Fracture reduction and fixation to bring back the anatomical relationships. Stable Fixation: – Fracture fixation providing relative or absolute stability, as required by the patient, the injury, and the fracture’s personality. Early, active mobilization: –Safe and early mobilization and rehabilitation of the injured part and the patient. Preservation of blood supply: – Preservation of the blood supply to bone and soft tissues by gentle reduction techniques and careful handling.
Locking Proximal Tibia Raft Plate 3.5mm (Left) - S.S.3 Holes5 Holes7 Holes9 Holes11 Holes

• Item Code: 571.003
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Volar Plate Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.

• Item Code: 590.002
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

Locking Superior Anterior Clavicle Plate Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.

• Item Code: 594.005
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per CE / ISO Standard

One Third Locking Plate Jindal Medi Surge are a OEM / BRAND manufacturer, exporter, and supplier of complete range small fragment locking compression plates and small fragment locking screws in Titanium and Stainless Steel Grade. Small fragment implants have been developed for fixation of fractures in the forearm, the distal end of the humerus, the ankle, the fibula, as well as small fragments of large bones. They are also used in pelvic and acetabular fractures. The strength and size of the implants correspond to these specific parts. Thus, they should not be used where for anatomical and mechanical reasons other sizes are recommended. The evolution of the technique of application and design, as well as new development, of current implants, comes from experience and continuous research. Most of the implants can be obtained in both titanium and in stainless steel from various small fragments orthopedic implants and instruments manufacturers who also manufacture cannulated screws, hip prosthesis etc. The instruments used for the temporary fixation of small fragments, reduction, and insertion of small fragment locking compression plate, are similar in principle to those for large fragments, but of dimensions that correspond to the bone size.

• Item Code: 544.004
• Production Capacity: 1000 Pieces
• Delivery Time: As Per Order Quantity
• Packaging Details: As Per Ce / ISO Standard